Lenovo 63BC-GAR6-WW Manual do utilizador - Página 28
Procurar online ou descarregar pdf Manual do utilizador para Monitor Lenovo 63BC-GAR6-WW. Lenovo 63BC-GAR6-WW 42 páginas.
Image rotation
Before rotating the monitor, you should set-up your computer to rotate the image. Rotating
the image may require special rotation software or you may find that your computer is
preloaded with video graphic drivers that allows image rotation. Check the Graphic
Properties setting on your computer to see if this feature is available. Try these steps to check
if image rotation is available on your computer.
1. Right-click on the desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have ATI, select the Rotation tab and set the preferred rotation. If you have nVidia,
Check with the manufacturer of your computer to see if graphic drivers with image rotation
can be downloaded from their support website.
Understanding power management
Power management is invoked when the computer recognizes that you have not using your
mouse or keyboard for a user-definable period. There are several states as described in the table
below.
For optimal performance, switch off your monitor at the end of each working day, or whenever you
expect to leave it unused for long periods during the day.
Table 2-4. Power indicator
** Maximum power consumption with max luminance.
This document is informational only and reflects laboratory performance. Your product may
perform differently, depending on the software, components and peripherals you ordered and
shall have no obligation to update such information. Accordingly, the customer should not rely
upon this information in making decisions about electrical tolerances or otherwise. No warranty
as to accuracy or completeness is expressed or implied.
click the nVidia tab, in the left-hand column select NV Rotate, and then select the
preferred rotation. If you have Intel, select the Intel graphics tab, click Graphic
Properties, select the Rotation tab, and then set the preferred rotation.
State
Power Indicator Screen Restoring Operation
On
Steady green
Steady White
Standby/
Suspend
Off
Off
Energy Star
Power consumption
P
< 16 W
on
E
< 49 kWh
TEC
Normal
Press a key or move the mouse.
Blank
There may be a slight delay reappears.
Note: Standby also occurs if there is no
image output to the monitor.
Off
Press power key to switch on
There may be a slight delay before the
image reappears.
Chapter 2 Adjusting and using your monitor 2-11
Compliance
ENERGY
STAR
ENERGY
STAR