Lenovo C2 Series Manual do utilizador - Página 40

Procurar online ou descarregar pdf Manual do utilizador para Telemóvel Lenovo C2 Series. Lenovo C2 Series 41 páginas. Machine type: 10075/3078, 10076/3079, 10077/3094, 10078/3095
Também para Lenovo C2 Series: Manual do utilizador (37 páginas), Manual do utilizador (35 páginas), Manual de substituição de hardware (25 páginas), Manual do utilizador (29 páginas), Manual do utilizador (45 páginas), Manual do utilizador (47 páginas), Manual do utilizador (43 páginas), Manual de início rápido (20 páginas), Manual do utilizador (45 páginas), Manual do utilizador (19 páginas)

Further Technical Explanation: The nominal capacity of the hard disk is

expressed in the decimal system, 1000 bytes. But the actual hard disk capacity is

expressed in the binary system as 1024 bytes (For example, the nominal capacity

1G is 1000M, while the actual capacity 1G is 1024M).

The capacity of the hard disk shown in Windows can be calculated according to

the calculations in the following example:

The nominal capacity of the hard disk is 40G, while its actual capacity should

be: 40 x 1000 x 1000 x 1000/(1024 x 1024 x 1024) = 37G.

If the Service partition of 3G - 3 x 1000 x 1000 x 1000/(1024 x 1024 x 1024)

= 2.79G is subtracted, the capacity of the hard disk shown in the system can

be obtained.

The capacity of the hard disk as calculated using this method may be slightly

different from the actual capacity due to the rounding of totals.

5.5 Special considerations for troubleshooting Windows

Record the following information that may later be useful in troubleshooting system

problems:

1. The serial number of the software. The serial number was shipped with the

computer and was provided separately by the manufacturer. The Help Center is

unable to retrieve this number.

2. The drivers for this computer model only support the Windows 7 system.

3. When you use the Windows Media Center to watch TV, be particularly attentive

to the following:

• In the following two situations, you must re-save a channel list:

a. When you change your TV signal from digital to analog, your saved

channel list for digital TV is deleted. When you want to watch digital TV

again, you must create and save a new channel list.

b. When you change your TV signal from analog to digital, your saved

channel list for analog TV is deleted. When you want to watch analog TV

again, you must create and save a new channel list.

• Before you can watch teletext programming, you must set the TV tuner input

signal to analog.

User Guide