Lenovo RackSwitch G8296 Manual de início rápido - Página 16
Procurar online ou descarregar pdf Manual de início rápido para Interruptor Lenovo RackSwitch G8296. Lenovo RackSwitch G8296 22 páginas. Onie for lenovo network operating system
Imprimir página
Booting in ONIE Mode
Booting in ONIE Install Mode
16
Lenovo ONIE Quick Start Guide for G8296
After you have activated and installed an ONIE image, you can boot the switch in
ONIE mode. ONIE offers four modes for booting, each providing a different
operation:
ONIE install mode
ONIE rescue mode
ONIE uninstall mode
ONIE update mode
There are two ways to boot the switch in an ONIE mode:
using the Command Line Interface (CLI):
Lenovo Cloud Network OS:
– startup image onie-image install
– startup image onie-image rescue
– startup image onie-image uninstall
– startup image onie-image update
using the Boot Management Menu (for more details, see
Menu" on page
19)
Note: For CNOS, the commands for booting in the different ONIE modes will
display an error if the ONIE license key is not installed on the switch.
This mode is used to install a NOS using ONIE. The ONIE install mode boots the
ONIE kernel and file-system and executes the ONIE discovery process. The
discovery process uses a number of different mechanisms to find a NOS installer
program.
Once a NOS installer is found, it is downloaded and executed. The installer loads
the Network OS on the switch, updates required ONIE environment variables and
reboots the switch.
The switch will now run its newly installed Network OS and behave like a regular
switch. The user can, at any point, reboot and run the ONIE installer again to
install another Network OS.
The Lenovo ONIE installer image, which installs the different Lenovo Network
Operating Systems, is called onie-installer-powerpc-lenovo_g8296-r0,
and it is available at the following link:
http://support.lenovo.com/
To boot the switch in ONIE install mode on the next reload, use the following
command from the switch CLI:
Lenovo Cloud Network OS:
G8296(config)# startup image onie-image install
"The Boot Management