Dirt Devil 360 REACH DD360 Manual do utilizador - Página 17
Procurar online ou descarregar pdf Manual do utilizador para Aspirador de pó Dirt Devil 360 REACH DD360. Dirt Devil 360 REACH DD360 20 páginas.
Imprimir página
- 1. Table of Contents
- 1. Quick Start Assembly
- 2. Tools
- 3. Using the Tools
- 3. Above Floor Cleaning
- 4. How to
- 4. Empty the Dirt Cup
- 4. Clean the Rinsable Filter
- 4. Clean the Exhaust Filter
- 4. Clean the Cyclonic Filter Assembly
- 4. Clean the Brush Roll
- 4. Store Your Unit
- 5. Troubleshooting
- 6. Technical Specifications
Any other servicing should be done by a Dirt Devil authorised service agent. If appliance is
not working as it should, has been dropped, damaged, left outdoors, or dropped into water,
take it to an authorised service agent prior to continuing use. For your nearest service centre
please call AU: 1300 361 505 / NZ: 0800 800 900
WARNING
PROBLEM
Vacuum
won't run
Dust escaping
from vacuum
Smoky/burning
smell detected
Vacuum tools
won't pick-up
Poor suction
To reduce the risk of personal injury - Unplug before cleaning or servicing.
POSSIBLE CAUSE
1. Power cord not firmly plugged
into outlet.
2. Blown fuse or tripped breaker.
3. No voltage in wall plug.
4. Thermal Protector activated.
1. Dirt cup full.
2. Dirt cup not installed correctly.
3. Filter not installed correctly.
1. Belt broken or stretched.
2. Brushroll is clogged.
1. Dirt cup full.
2. One or both filters are clogged.
3. Stair + upholstery tool not
spinning.
4. Power carpet nozzle not
spinning.
1. Dirt cup not seated completely.
2. One or both filters clogged.
POSSIBLE SOLUTION
1. Plug unit in firmly.
2. Check fuse or breaker in home. Replace
fuse/reset breaker in home.
3. Check fuse or breaker in home. Replace
fuse/reset breaker in home.
4. Unplug and allow vacuum to cool for 30 min.
(This will reset the thermal protector)
1. Empty dirt cup.
2. Review Dirt Cup removal & replacement.
3. Review Filter Removal and Cleaning.
1. Call us on AU: 1300 361 505
/ NZ: 0800 800 900
2. Clear/remove debris from brushroll.
1. Empty dirt cup.
2. Remove both filters and clean.
3. Review tool section.
4. Review tool section.
1. Reinstall dirt cup make sure lid is closed
completely.
2. Remove both filters and clean.
7 17