Nikon 50i Manual de instruções - Página 19

Procurar online ou descarregar pdf Manual de instruções para Microscópio Nikon 50i. Nikon 50i 40 páginas. Clinical & laboratory microscopes
Também para Nikon 50i: Especificações (2 páginas), Manual de instruções (24 páginas)

Imprimir página

Troubleshooting/Repair

If this product fails to function as expected, check the list below before consulting your local dealer or the

store where you purchased it.

l l If there is a problem with the product.

Problem

• Does not turn on

• Unable to measure

• Anomalous result

• Do not know if STABILIZED

function is working

• Cannot turn off the STABILIZED

function

• There are minute motion sounds

when the power turns on and off

• There are sounds from the inside

when the body is shaken while

the power is off

• [ ] is displayed in the internal

display

• Press the PWR button (top of the body).

• Check that the battery is inserted correctly.

• Replace the battery with a new one.

• Confirm the settings.

• Confirm if it can measure a large target close to you (example: a building

approx. 15 m/yd. ahead of you).

• Clean the lens surface if necessary.

• Compare the vibration of the target in the viewfinder when the Laser

Rangefinder is ON and OFF.

• While the Laser Rangefinder is ON, the STABILIZED function is always activated.

• The STABILIZED function is activated concurrently when the Laser

Rangefinder is ON. When the Laser Rangefinder is OFF, the STABILIZED

function automatically turns off.

• The STABILIZED function cannot be turned on or off manually.

• Due to the STABILIZED system motor, minute motion sounds occur.

These sounds are normal, please continue to use the Laser Rangefinder.

• The stabilizing mechanism moves inside. These sounds are normal.

These sounds do not occur when the power is on, even if the body is

shaken.

• Failure indication. Please contact your local dealer or the store where you

purchased the product.

Cause/Solution