Nikon Eclipse E600 Manual de instruções - Página 27

Procurar online ou descarregar pdf Manual de instruções para Microscópio Nikon Eclipse E600. Nikon Eclipse E600 37 páginas. Teaching head/multi teaching head
Também para Nikon Eclipse E600: Manual de instruções (38 páginas), Manual de instruções (37 páginas), Manual de instruções (21 páginas)

Imprimir página

CAUTION

+ To prevent electrical shock and damage to the microscope, always turn off the

power switch (flip it to the " :" side) and unplug the power cord when connect-

ing or disconnecting the lamphouse.

+ To prevent burns, allow the lamp and lamphouse to cool before replacing it for

at least 30 minutes after using.

* Use the Nikon C-LP HALOGEN

12V-100W model for the lamphouse.

* Use a 12 V-100 W LONGLIFE halogen lamp (OSRAM HLX 64623 or PHILIPS

7724).

* Do not touch the glass surface of the lamp with your bare hands. Doing so will

cause fingerprints, grease, etc., to burn onto the lamp surface, reducing the illu-

mination provided by the lamp.

If you do get any fingerprints or dirt on the

lamp, wipe it clean.

* After replacing the lamp, make sure that the lamphouse cover is attached se-

curely.

Never use the lamphouse while its cover is off.

Clamp lever

Check that the power switch is off (i.e., that it is flipped to the "

" side).

If the lamphouse is mounted on the microscope, use a hexagonal screwdriver to loosen the

lamphouse clamp screw, and then remove the lamphouse from the microscope (the screw is

on the top of the lamphouse mount).

Use a hexagonal screwdriver to loosen the clamp screw on the front of the lamphouse and

remove the lamphouse cover.

While pressing the lamp clamp lever, push the lamp into the socket pin holes as far as it will

go.

(Do not touch the glass portion of the lamp with your bare hands.)

Return the clamp lever to its original position. Make sure that the lamp is not tilted.

Attach the cover securely and tighten the clamp screw.

Make sure that the cover is fixed in

place and will not come off even when shaken by hand.

Connect the lamphouse to the microscope by inserting the lamphouse plug into the lamphouse

socket.

Tighten the lamphouse clamp screw to secure the lamphouse in place.