Nikon ECLIPSE E600 POL Manual de instruções - Página 8
Procurar online ou descarregar pdf Manual de instruções para Microscópio Nikon ECLIPSE E600 POL. Nikon ECLIPSE E600 POL 48 páginas. Polarizing microscope
Imprimir página
8
Microscopic Procedure
The general procedure for microscopy is described below.
For details on each step. refer to the corresponding item in chapter .. 3. Operation of Each Part."
If the microscope has not yet been assembled. see chapter "4. Assembly .. first.
1
Diascopic Illumination Microscopy
D
Turn the Epi/Dia changeover
switch on the back of the
microscope stand to the DIA
position.
a
Turn on the power.
Kii:I
(Flip the switch to the .. I •. side.)
As soon as the power comes on.
the switch lights.
1:'11
Set the brightness adjuster to
a
give the desired brightness.
Pressing the auto-photo switch
will set the voltage for the
brightness that provides the best
color reproduction. (p.25)
B
Insert filters ND32 or
8
and
U
NCB 11 into the optical path.
ND32 or 8 reduces glare in the
binocular eyepiece. NCB 11
improves color reproduction.
(p.24)
a
Push in the analyzer slider of the
a
intermediate tube to remove the
~ivi:v,
analyzer from the optical path.
··~· i'·.·.;.··~;.
;.:i~j:
1'!!9
Put the Bertrand lens turret in the
a . .
0 .. position to remove the
Bertrand lens from the optical
path.
II
Insert filters.
,_,~
II
Adjust the brightness.
~ ·~,~
Auto-photo switch can be pressed
_ !
1
-11
Push in the
,
analyzer
/
~'
-1'1
Turn the turret to
the "O" position.
slider.