Nikon Callaway iQ Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição Nikon Callaway iQ. Nikon Callaway iQ 39 páginas. Nikon callaway iq laser rangefinder instruction manual
Também para Nikon Callaway iQ: Manual de instruções (28 páginas), Manual (2 páginas)

Imprimir página

Internal display

1. 『

』- Target aiming/Laser irradiate system

『

』- Aim at the target. Position the target at the center of the reticle.

『

』- Appears while the laser is being used for a measurement.

(Remains present during single measurement. Blinks during continuous measurements.)

Warning: Do not look into the objective lenses when this mark is shown.

2．Upper display

Distance/measurement status display

Digitally indicates measured distance in meters/yards. Also indicates

measuring status such as "Measurement in progress", "Measurement

Lower display

unsuccessful" or "Unable to measure. "

Upper 4 digits: Linear distance

Display of results: ( ＜ 999.9 meters/yards)

Display of results: ( ≧ 1,000 meters/yards)

Lower 3 digits: Slope adjusted distance

The results of "Horizontal distance ± Height"

Display of results: ( ＜ 999 meters/yards)

Display of results: ( ≧ 1,000 meters/yards)

『

』 Now measuring

『

』 Failure to measure or unable to measure distance

3. 『

』Display units

『

』Indicates distance being measured in meters.

『

』Indicates distance being measured in yards.

4. 『

』 Indicates battery condition. (See "Changing Batteries")

5. Measurement results and symbol sign

- Calculates linear distance to your target, and displays the result in the upper 4-digit 7-segment

display.

- C alculates the slope adjusted distance to your target by measuring linear distance and angle,

Upward

Downward

and displays the result in the lower 3-digit 7-segment display.

e.g. 234.9 meters = 『

』

e.g. 1,065 yards = 『

』

e.g. 235 meters = 『

』

『

』

6. Active Brightness Control Viewfinder

Active Brightness Control Viewfinder detects light conditions of

the ground area mainly in the view field and, when necessary,

automatically turns on the orange LED illumination.

The brightness of the orange illumination is adjusted

automatically according to the light conditions.

Although the LCD was produced using the most advanced

technology, it is impossible to eliminate dust completely. When

using this product, the LCD is magnified by high magnification

of the eyepiece lens and dust may appear as a defect. It will not,

however, affect measurement accuracy.

Operational summary

Caution — use of controls or adjustments or

performance of procedures other than those

specified herein may result in hazardous radiation

exposure

1. Install a battery in the battery chamber. (See "Changing

Batteries")

2. Rubber eyepiece cup

Both eyeglass wearers and non-wearers can use this

rangefinder without attaching the rubber eyepiece cup.

3. Diopter adjustment

Adjust diopter to obtain a clear image in the LCD.

First, rotate the diopter adjustment ring counterclockwise until

it comes to a complete stop. Next, turn on the power to activate

the LCD when you look through the Nikon Callaway iQ. Rotate

the diopter adjustment ring clockwise until the display comes

into focus.

If the diopter is not adjusted to correspond to your eyesight,

you may not be able to aim your subject.