Nikon Nivo Series Manual de instruções - Página 28
Procurar online ou descarregar pdf Manual de instruções para Instrumentos de medição Nikon Nivo Series. Nikon Nivo Series 32 páginas. Hardware
Também para Nikon Nivo Series: Manual da interface de comunicação (34 páginas)
2
Preparation
Sighting
When you sight the instrument, you aim the
telescope at the target, bring the target image into
focus, and align the image with the center
crosshairs of the reticle.
To sight the instrument:
1.
C
WARNING –
your eyesight.
2.
3.
1 6
Total Station Nivo Series Instruction Manual
Adjust the diopter:
a.
Aim the telescope at a blank area, such
as the sky or a piece of paper.
Never look at the sun through the telescope. If you do, you may damage or lose
b.
Looking through the eyepiece, rotate the
diopter ring until the reticle crosshairs
are in sharp focus.
Eliminate parallax:
a.
Aim the telescope at the target image.
b.
Rotate the focusing ring until the target
image is in sharp focus on the reticle
crosshairs.
c.
Move your eye vertically and laterally to
check whether the target image moves
relative to the reticle crosshairs.
If the target image does not move, there is no parallax.
d.
If the target image does move, rotate the telescope focusing ring. Then
repeat from Step c.
Rotate the tangent screw:
The final turn of the tangent screw should be in a clockwise directions, to
–
align the target accurately on the center crosshairs.
Center
crosshairs
Diopter ring Telescope focusing
ring