Nikon Bolt XR Manual de instruções

Procurar online ou descarregar pdf Manual de instruções para Binóculos Nikon Bolt XR. Nikon Bolt XR 2 páginas.

Imprimir página

For service or repair in the USA market, please send it directly to:Nikon Scope Service

841 Apollo Street, Suite 100

El Segundo, CA. 90245-4721

1-800-Nikon SV.

In other market, please bring it to dealer from which you purchased it.

Pour les autres marchés, veuillez apporter la lunette de visée au magasin où vous

l'avez achetée.

Manufacturer:

Fabricant:

3-25, Futaba 1-chome, Shinagawa-ku, Tokyo 142-0043, Japan

Tel:+81-3-3788-7697 Fax:+81-3-3788-7698

Congratulations on your choice of a Nikon Crossbow Scope. Your new scope is the finest

example of Nikon's rugged and durable construction and precision bright optics; important

qualities for a serious crossbow shooter's scope.

Whether you use your scope for hunting or for target shooting, the procedure for mounting

is identical. You should acquire a set of high quality mounting rings which have a

standard diameter of 25.4 mm (1inch). Follow the ring manufacturer's instructions for

mounting procedures. After mounting the scope on your crossbow, follow the procedures

for reticle alignment.

Caution

(1) Do NOT look at the sun through the crossbow scope. It will permanently damage

your eye. This precaution applies to all optical devices such as cameras and

binoculars.

(2) Do NOT mount on any firearms since this is a crossbow scope.

(3) The crossbow scope is effectively sealed against moisture and dust. You may use

your scope safely either in the rain or in dusty climates. To preserve the appearance

of the scope, we suggest that it be dried and cleaned prior to storage. Use a soft

cloth for cleaning metal surfaces and use photographic lens tissue to clean the

scope's lenses.

When setting the reticle for hunting, you should determine your standard range and then

adjust the reticle based upon that target distance. For targets which vary from the standard

distance you may simply adjust the position of the reticle in relation to your target, or you

may wish to use the procedure for trajectory compensation. You can also go to www.

Nikonhunting.com/spoton to compare, graph and enhance your reticle settings. It's up to

your personal preference.

We hope that you will enjoy your new Nikon crossbow scope for many years to come.

Enjoy using it, and above all, always follow safe shooting procedures!

The product(s) described herein may be subject to export control regulations in the

relevant country(ies). It (they) should not be exported without authorization of the

exporting govermental authority if the regulations apply.

1. Nomenclature

❶

❸

❹

3x32

❶ Objective Lens

❹ Windage Adjustment

❷ Eyepiece Lens

❺ Eyepiece Adjustment

❸ Elevation Adjustment

❻ Adjustment Cap

2. Specifications

Model

Actual Magnification

Objective Diameter

Exit Pupil

Eye Relief

Tube Diameter

Objective Tube Diameter

Outside Diameter of Eyepiece

Adjustment Graduation

Max Internal Adjustment (Elevation & Windage)

Parallax Setting

Field of View at 100yds

Field of View at 100m

Length

Weight

* moa=minute of angle (in front of 100 yards one moa is nearly equal to one inch.)

Specifications and equipment are subject to change without any notice or obligation on the part of the manufacturer.

CrossbowscopeBoltXR_540B.indd 1

Printed in the Philippines (540B)1012/1E

Imprimé en Les Philippines

❻

Fig. 1-1

❺

Bolt XR 3x32

(mm)

(in)

1.26

(mm)

10.7

(in)

0.42

(mm)

86.4

(in)

3.4

(mm)

25.4

(in)

(mm)

39.3

(in)

1.55

(mm)

(in)

1.61

1click : 1/4" @ 20yd

*(moa)

150

(m)

18.29

(yds)

(ft)

35.6

(m)

11.87

(mm)

205

(in)

8.1

(g)

285

(oz)

10.1

Nikon Crossbow Scope

Instruction manual/Mode d'emploi

3. Instructions

(1) Focusing

❶ Look through the eyepiece with your eye positioned about 3 - 4 in (7.5 - 10cm)

away from the eyepiece lens, and you will see the BDC 60 reticle.

❷ Be sure your eye is positioned within proper alignment and proper eye relief

otherwise the view will "black out."

❸ Point the objective end of the scope at the sky (Do not point at the sun) or at a

plain unpatterned wall.

❹ Turn the eyepiece adjustment counter-clockwise and then turn it clockwise until

the reticle appears sharp.

(2) Adjustment of the crossbow scope

Sighting through the crossbow scope, align the crossbow with your aiming point on

the target and shoot a trial bolt. If the bolt does not hit the aiming point, adjust the

elevation and windage, as follows:

⃝ If the bolt hits under the aiming point, turn the elevation adjustment (counter-

clockwise) in the direction of the arrow marked "U" for up.

If the bolt hits high, turn adjustment (clockwise) in the direction of the arrow

marked "D" for down.

⃝ If the bolt hits to the right of the aiming point, turn the windage adjustment

(clockwise) in the direction of the arrow marked "L" for left. If the bolt hits to the left

of the aiming point, turn adjustment (counter-clockwise) in the direction of the

arrow marked "R" for right.

⃝ After the reticle has been adjusted to the point of impact, replace adjustment cap

both the windage and elevation turrets.

(3) Zero setting of scale grip

The adjustment ring has a pop-up adjusting system. After the reticle has been adjusted

to the point of impact, for zero setting pull out the adjusting ring. The adjusting ring

can turn freely now, and align the zero number to index line, then release the ring. It

automatically retracts to the original position.

Waterproof Specification:

The crossbow scope is waterproof, and will suffer no damage to the optical system if

submerged or dropped in water to a maximum depth of 1 meter for up to 10 minutes.

❷

The crossbow scope offers the following advantages:

⃝ Can be used in conditions of high humidity, dust and rain without risk of damage.

⃝ Nitrogen-filled design makes it resistant to condensation and mold.

Observe the following when using the crossbow scope.

⃝ It should not be operated nor held in running water.

⃝ Any moisture should be wiped off before adjusting movable parts (Adjustment

knob, eyepiece, etc.) of the crossbow scope to prevent damage and for safety

reasons.

To keep your crossbow scope in excellent condition, Nikon Vision recommends

regular servicing by an authorized dealer.

Note:

⃝ The windage and elevation scales of the Bolt XR 3x32 are calibrated to move the point

of impact ¼ inch per click at 20 yards.

Maintenance

(1) Lens cleaning

To remove dirt or fingerprint, soak gauze or lens cleaning paper (silicon-free paper

sold at camera shop) with a small quantity of absolute alcohol (available form

drugstore) and lightly wipe off. Wiping with leather chamois is not recommended as it

is likely to damage the lens surface.

Dust may scratch the lens surface or corrode the lens.

Brush dust off using a soft oil-free brush.

(2) Scope Exterior

Use a soft dry cloth to wipe off any dirt or fingerprints that might accumulate.

It is not necessary to oil the scope's surface.

(3) Windage/Elevation Adjustments

These adjustments are permanently lubricated. Do not attempt to lubricate them. Cover

with caps supplied, except when adjusting, to keep out dust and dirt.

(4) Eyepiece Adjustment

This adjustment is permanently lubricated. Do not attempt to lubricate.

BDC 60 Reticle

Fig. 3-1

Bolt XR

ITEM SUPPLIED

Body .................................... 1pc.

Eyepiece cap .......

................ 1pair

Objective cap ......

20 yds

30 yds

40 yds

50 yds

60 yds

11.1.6 1:25:08 PM