Dirt Devil Breeze 082500 Manual do Proprietário - Página 5
Procurar online ou descarregar pdf Manual do Proprietário para Aspirador de pó Dirt Devil Breeze 082500. Dirt Devil Breeze 082500 8 páginas.
Imprimir página
HOW TO ASSEMBLE:
HOSE INSTALLATION
AND REMOVAL
WARNING:
TO REDUCE
THE RISK OF INJURY -UNPLUG
CLEANER
BEFORE
REMOVING
OR iNSTALLING HOSE.
1.
Hold hose and match tabs to align with slot inlets of canister (Diagram t).
2.
Insert hose. Tum clockwise
until
hose locks into place (Diagram 2).
ATTACHMENT
INSTALLATION
AND REMOVAL
1.
The hose can be used alone or with many combinations of'wands and tools.
2.
Attachments
are packaged separetly in the box. To
store on the unit,
simply slide them into the tool clip already located on one of the exten-
sion wands.
3.
Choose
any of the handy accessories
to meet your various cleaning
needs. Then simply push it firmly onto the hose or wand end until the
pin locks into place.
4.
To remove the tool, pull apart gently. You may gently rotate the attachment
back and forth a little to make the removal easie
rotate and then pull apart.
HOW TO OPERATE:
1.
Snap together the two interlocking wands until pin locks into place.
2.
Push assembled wands
into desired
cleaning nozzle (carpet nozzle or bare floor nozzle).
Pile or Low Pile,
b. Bare Floor Cleanine
- Attach
Floor Nozzle
and use.
3.
Insert handle end of hose into assembled wands.
4.
Push power switch to tum the unit on.
5.
Pull handle back into the operating position.
r. To unlock the wand, push pin,
a. Carpet
cleanino
- Select
caroet
settino
on nozzle
to Hioh
NOTE:
For cleaning
drapes,
throw rugs, or other
loose items, you may need to reduce
the suction
to prevent
sucking
the item into
the cleaning
tool. To reduce
suction,
twist the plastic end on the handle
grip until the hole in the grip is exposed.
Uncover
the hole
until the desired
amount
of reduced
suction
is achieved.
POWER NOZZLE ASSEMBLY
3.
(REFER TO FIGURE A).
WARNING:
TO REDUCE
THE RISK OF
INJURY
FROM MOVING
PARTS - UNPLUG
CLEANER
BEFORE
CONNECTING
OR DISCON-
NECTING
POWER
NOZZLE.
I.
Push together the two interlocking
wands until pin locks in place.
2.
insert assembled
wands into power nozzle
to lock into place.
3.
Press power nozzle cord into slots on back
of wands.
4.
insert haqdte end of hose into assembled
wards.
5.
Press cord clips (already attached to cord)
onto hose.
HOSE INSTALLATION
AND REMOVAL
WARNING:
TO REDUCE
THE RISK OF INJURY
- UNPLUG
CLEANER
BEFORE
REMOVING
OR INSTALLING
HOSE.
I.
Hold hose and match tabs to align with slot inlets of canister (Diagram
1 ).
2.
Insert hose. T um clockwise
until hose locks into place (Diagram 2).
3.
Plug the cord from the hose into the outlet on the cleaner located just in front of carry handle (Diagram
3).
ATTACHMENT
INSTALLATION
AND REMOVAL
1.
Choose any of the handy accessories
to meet your various cleaning needs.
2.
3.
4.
Then simply push itfimlly onto
the hose or wand end.
Attachments
are packaged
separetly in the
box. To store on the unit, simply slide them into the tool clip already located
the extension wands.
The hose can be used alone or with many combinations
of wands and tools. Push the wand into the hose
handle until the pin locks into place.
To remove the tool, pull apart gently. You may gently rotate the
attachment
back and forth a little to make the
removal easier. To unlock the wand, push pin, rotate and then pull apart.
on one of
HOW TO OPERATE:
1.
Pull handle back into the operating position.
2.
Push power switch on POWER
P AK nozzle as shown (Diagram
4).
3.
Select carpet or bare floor cleaning (Diagram
4).
a. For Carpet Cleaning - Push power switch on the power nozzle. Be
sure brush roll is rotating for
b. For Bare Floor Cleaning, push power switch on the power nozzle. Be sure brush roll stops rotating.
5
effective cleaning and groom
ing.
FIGURE A
CordClip
2<
Power Nozzle