Dirt Devil Featherlite with stretch hose Manual do Proprietário - Página 3

Procurar online ou descarregar pdf Manual do Proprietário para Aspirador de pó Dirt Devil Featherlite with stretch hose. Dirt Devil Featherlite with stretch hose 5 páginas. Upright

Imprimir página

HANDLE ASSEMBLY

Featherlite

with stretch hose

Body

HOW TO ASSEMBLE

Handle Assembly:

1. Rotate handle base to the upright position.

WARNING: BEFORE ASSEMBLING THE BODY OF THE CLEANER TO BASE, MAKE SURE POWER CORD IS DOWN AND OUT OF THE WAY TO AVOID PINCHING CORD.

2. With cord hook to back, place the body of the cleaner onto base. Push together firmly. Insert longer screw (1

3. Place handle onto the body of the cleaner, (Diagram 2).

4. Insert clip on tool caddy into hole on back of handle, (Diagram 3). Bring tool caddy down to fit against handle. Insert shorter screw (1") to secure caddy and handle sections.

Insert second shorter screw just above cord release (Diagram 4).

Attach Tools:

5. Insert nozzle connector end of flexible hose into holder. Wrap flexible hose to the other side. A) Insert hose into holder on back of cleaner. B) Press sides of hose into place

on tool caddy, (Diagram 4).

6. Insert extension wand and crevice tool into tool caddy. Attach 2-in-1 tool to clip on caddy. Push down to secure, (Diagram 5).

NOTE: Paper bag must be properly installed before operating.

HOW TO OPERATE

HOW TO OPERATE:

WARNING: FULLY ASSEMBLE BEFORE OPERATING.

1. Quick Cord Release: To release your cord without unwinding it, turn the top cord hook to the left or right. Your power cord will now pull off in one coil, (Diagram 1).

2. Keep the cord out of the way while you vacuum by snapping it into the cord guide on the back of the handle, (Diagram 2).

3. Plug cord into electrical outlet.

4. Step on the power switch to turn on the cleaner. Switch is grey and located on the base of the unit.

FLOOR/CARPET CLEANING:

5. Release the handle. With your foot, depress the handle release pedal on the left side of the base, (Diagram 3).

6. Move the handle and adjust it to the desired position for (a) storing the upright, (b) operating the cleaner, and (c) depress the handle release pedal again to clean under low

furniture, (Diagram 4).

ABOVE FLOOR CLEANING: Cleaner must be in the locked upright position to lift the rotating brush off the carpet when cleaning above the floor.

Turn cleaner OFF before attaching or removing hose.

1. Snap cleaner into its upright position.

2. Lift door on the nozzle and insert hose end with nozzle connector until locked in position, (Diagram 5).

3. Pull the hose handle from side of cleaner.

CAUTION: Brush agitator continues to rotate while hose is removed or in use and at all times while cleaner is on. Keep hair, loose clothing, fingers, and all parts of body

away from brush area while cleaner is on.

4. Choose any of the handy accessories or use the hose alone. Simply push the attachment firmly onto the end of the wand or hose handle.

To remove hose from nozzle, press latch on nozzle connector and pull up, (Diagram 6).

NOTE: Remove hose from nozzle when cleaning carpets to insure proper cleaning performance.

CAUTION: Revolving brush continues to rotate while cleaner handle is in upright position. Avoid tipping cleaner or setting on furniture, fringed area rugs, or carpeted

stairs during tool use.

TOOL REQUIRED: PHILLIPS SCREWDRIVER

") into back of body of the cleaner to secure, (Diagram 1).

is the international symbol for power.