ARMORDILLO CR X Montagem - Página 2
Procurar online ou descarregar pdf Montagem para Acessórios para automóveis ARMORDILLO CR X. ARMORDILLO CR X 10 páginas. Chase rack
Imprimir página
LEVEL OF DIFFICULTY: EASY
INSTALL TIME: 60-90 MIN.
IF YOU ARE HESITANT TO UNDERTAKE
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED
INSTALLER FOR ADDITIONAL ASSISTANCE
SAFETY GLASSES AND GLOVES SHOULD BE WORN AT
ALL TIME WHILE INSTALLING THIS PRODUCT.
TOOL REQUIRED
SIZE
3/16"-7/16"
13 & 17mm
5/16"
M10
INSTALLATION TIPS:
1) REMOVE CONTENTS FROM BOX, VERIFY ALL PARTS LISTED ARE PRESENT AND
FREE OF DAMAGE. READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE
ATTEMPTING INSTALLATION.
2) TWO PERSON WILL BE REQUIRED WHEN MOUNTING AND ALIGNING CHASE
RACK.
3) USING PROPER TOOLS WILL IMPROVE THE QUALITY OF THE INSTALL AND
REDUCE INSTALLATION TIME.
4) ANTI-SEIZE LUBRICANT IS HIGHLY RECOMMEND TO USED ON ALL STAINLESS
STEEL FASTENERS TO PREVENT DAMAGE TO THE THREAD AND GALLING.
PERIODICALLY CHECK TO ENSURE ALL FASTENERS ARE TIGHT A ND ALL STRUCTURAL COMPONENTS ARE SOUND
Armordillo USA warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original
purchaser. If the product is found to be defective, We may repair or replace the product at their option, when the product is returned, prepaid,
with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. We liability is limited to repair or
replacement of products found to be defective, and specifically excludes liability for incidental
21912 Garcia Ln, Walnut, CA 91789
WWW.ARMORDILLOUSA.COM
Driver Side Panel
Middle Section
M10 Washer
M10 Nutsert/Rivet Nut
M8x20mm Button
Head Bolt
M8 Lock Washer
DESCRIPTION
Drill Bit/Step Drill bit
Drill
Socket/Wrench
Allen Wrench/Socket
Nutsert/Rivet nut Tool
Utility Knife
Parts
PARTS LIST:
1
1
6
6
6
6
Hardware Reference Chart
M6
Socket size
10mm
13mm
Grade 8.8/8.9
20ft.lbs.
102ft.lbs.
Grade 10.9
144ft.lbs.
30ft.lbs.
Passenger Side Panel
M10x35mm Button
Head Bolt
M10 Lock Washer
M8 Washer
M8 Hex Nut
M8
M10 M12 M14 M16
17mm
19mm
22mm
50ft.lbs.
70ft.lbs.
110ft.lbs.
72ft.lbs.
1t40ft.lbs.
165ft.lbs.
1
6
6
12
6
24mm
175ft.lbs.
225ft.lbs.
(909) 895-4522
1/2020 4100 REV2