3Com NBX 2101 Manual de referência rápida
Procurar online ou descarregar pdf Manual de referência rápida para Telefone 3Com NBX 2101. 3Com NBX 2101 2 páginas. Basic telephone
Também para 3Com NBX 2101: Manual de referência rápida (2 páginas)
Imprimir página
This guide assumes that the access buttons on your NBX
Basic Telephone have these default settings, left to right:
NBX 2101 — Feature, Call Toggle, Transfer
NBX 3101 — Line1, Line2, Feature, Transfer
Your administrator can change the settings of these buttons,
although doing so limits the features that you can use.
Put a Call on Hold
While you are on a call, press Hold (2101) or
The display icon or button light for line 1 or line 2 blinks.
To return to the call, press Call Toggle (2101) or the line
button (3101).
Transfer a Call
1. While you are on a call, press Transfer.
2. When you hear the dial tone, dial the number to which
you want to transfer the call.
3. As soon as you hear ringing, press Transfer
(for a blind transfer), or wait until the recipient answers,
announce the call, press Transfer, and then hang up.
Make a Conference Call
1. Place or receive a call. Two parties are now on the call.
2. While you are on the first call, press Feature + 430.
3. Listen for the dial tone. Dial the third party, wait for
that party to answer, and press Feature + 430 again.
4. Optionally, repeat steps 2 and 3 to add a fourth party.
At least one party must be internal. The conference ends
when the last internal party hangs up.
To place your part of a conference call on hold, press
Hold or
. The other parties can talk to each other,
but they cannot hear you. (Music on Hold is not played.)
To transfer a conference call, see Transfer a Call.
To drop the last person whom you added to the
conference (for instance, if the called party's telephone is
answered by someone else), press Feature + 431.
Adjust the Volume
Handset — Lift the handset, listen to the dial tone,
and repeatedly press the louder or softer button.
Speaker (3101SP only) — Press
tone or your caller's voice, and repeatedly press the louder
or softer button.
Ringer — While the telephone is ringing, repeatedly
press the louder or softer button.
Set or Change Your Speed Dials, Call Forwarding,
Call Pickup, and Phone Lock
See the NBX Basic Telephone Guide or NBX NetSet
®
NBX
Basic Telephone
Quick Reference Guide
, listen to the dial
™
Create Labels for Your Telephone
Log in to NBX NetSet > Speed Dials > Telephone Labels.
Forward Incoming Calls Directly to Voice Mail
(Calls ring once and go to your default call coverage.)
Pick up the handset and press Feature + 440. The display
shows FWD. All incoming calls ring once and are forwarded
to your default call coverage point. To turn the feature off, lift
the handset and press Feature + 440 again.
(3101).
Do Not Disturb
(Calls go immediately to your default call coverage.)
Pick up the handset and press Feature + 446. All calls go
directly to your default call coverage point without ringing on
your telephone. The display indicates that the feature is
active. To turn the feature off, pick up the handset and press
Feature + 446 again.
Park a Call
1. While you are on a call, press Feature + 444.
2. Dial one of the extensions reserved for Call Park. Factory-
installed Call Park ranges:
3-digit dial plan
601–609
Ask your administrator if your system has a different
range of Call Park extensions.
The call is parked until someone retrieves it, the caller
hangs up, or the Call Park timer expires.
If the extension you chose is busy or if the Call Park timer
expires, the call returns to your telephone.
Press Feature + 444 again and try another extension.
Retrieve a Parked Call
Dial the Call Park extension where the call was parked.
Dial from the Telephone Display Panel
1. Pick up the handset.
2. Press one of the up or down scroll buttons,
3. Scroll up or down to the list that you want:
Call Logs (Missed Calls, Answered Calls, Dialed Calls),
Directory, Personal Speed Dials, or System Speed Dials.
4. Press one of the buttons below the display:
Slct — To select the list that you want to see.
Back — To return to the previous menu.
Exit — To leave the display panel menus.
5. Repeat steps 3 and 4 until you see the name or number
that you want. Then press Slct to dial the number.
Help.
4-digit dial plan
6000–6099
2101 or
3101 to view the menu of choices.
qrefbas-EN
2-2005