Disc Makers 1.1 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Hardware informático Disc Makers 1.1. Disc Makers 1.1 15 páginas. Dvd disc duplicator

Imprimir página

The ReflexPro DVD is a high performance DVD disc duplicator designed for both

the novice and professional user. It is designed for a variety of applications

that require the exchange of audio, video or data content. The following is a

User Guide that outlines the menu commands of the unit and immediate func-

tions of the unit. For additional technical support please call 888-800-4041.

GETTING STARTED

Carefully remove the DVD duplicator from its shipping container. Please inspect

the contents and verify them against the packing slip. Be sure to report any

errors in shipping immediately to Disc Makers.

Packing materials: Please save the original box and packaging in the event the

unit requires future service or you need to move the unit from one location to

another. This will help reduce the possibility of damage in transit.

Please Note: Any item that needs to be returned for a warranty repair must be

returned in original packaging.

NSTALLATION AND

ETUP

1. Unpack the ReflexPro DVD to a clean and cool work area. Keep the external

packaging for future storage and transportation.

2. Place the ReflexPro DVD on a flat, clean and dust free surface.

3. Connect the power cord from the back of the unit to an electrical outlet. Do

not bypass the Ground.

4. The Front panel should appear as below.

1-800-237-6666

ODES AND

ODES

The ReflexPro DVD is able to duplicate in two different modes: hard drive to disc

and disc to disc. The unit is factory preset to hard drive to disc. This mode is

efficient for duplicating large numbers of discs. The hard drive to disc copies

the master to the hard drive and then copies the data to each of the drives. This

insures an exact copy of the original master to every disc.

The disc to disc mode will copy whatever is in the source (Src) drive to blank

media in the other drives in the unit. This mode is most effective for making

quantities of discs less than the number of drives in the unit. For the

ReflexPro4 DVD if the need is for three discs or less, use the disc to disc mode.

For the ReflexPro7 DVD if the need is for six discs or less, use the disc to disc

mode.

Only slight changes will occur in the functions of the unit when the different

modes are chosen. When the unit is in the hard drive to disc mode 'P: A' will

appear at the right side of the first line of the LED. 'P' indicates the master disc

will be written to the hard drive and the next letter indicates which partition will

be written to.

ARD

RIVE TO

ISC

Upon powering up the ReflexPro DVD the LCD screen should appear as below:

www.discmakers.com

OPYING

1. Copy

P:A