Disc Makers ElitePro Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Hardware informático Disc Makers ElitePro. Disc Makers ElitePro 13 páginas. Elite series

ElitePRO Getting Started Guide

Minimize Discus to return to the Disc from Disc Duplication wizard. The wizard

displays a selection box that allows you to choose the output.prn ﬁle as the

source for the automated duplication and printing task. Once this image ﬁle has

been selected, click Next to continue the procedure.

Note: Additional information on creating label images is included in the Elite Series

User Guide and the Discus User Guide, which can be accessed through the Discus

help system.

Duplicating discs for the ﬁrst time

At the completion of the wizard, FlexWare returns to the main application window

with all the appropriate settings established.

To start the duplication operation, ﬁrst check to see if you have a master CD in

the input spindle with two blank CDs underneath it.

Click the Play button in the center of the window. The ElitePRO duplicator pick

arm rotates to the input spindle, lowers to pick up the master disc, extracts the

master disc, and places it in the upper disc recorder. FlexWare then proceeds to

make a temporary image from this master to use during the copy operation.

Once the image is made, FlexWare unloads the master and places it on the

output spindle. The program then proceeds to load each of the blank discs

and copy the image to them. Each of the copied discs is then loaded into the

printer and the selected image is printed on the disc surface.

The operation ends when FlexWare unloads the completed discs onto the out-

put spindle.

ElitePRO_Getting_Started_03.indd 10

2/20/06 4:40:09 PM