Aercus WS2083 Manual do utilizador - Página 9

Procurar online ou descarregar pdf Manual do utilizador para Estação meteorológica Aercus WS2083. Aercus WS2083 18 páginas. Professional wireless weather station with usb upload

Imprimir página
Aercus WS2083 Manual do utilizador
Date
Press the MENU key twice to select the DATE section, the DATE section digits will start flashing. Press the
ENTER key
to shift the display between the following parameters and press
value:
Date Format
Year
Month
Day
Time Alarm
After editing the Time Alarm it can be enabled or disabled by pressing ON/OFF while the hour or minute of
the Time Alarm is flashing. An alarm symbol
function has been enabled. Note: Press any key to mute the alarm.
Note: Alarms can also be set for most of the weather variables (see below for instructions on setting).
a set weather alarm condition has been triggered that particular alarm will sound for 120 seconds. The
corresponding value, 'HI AL" or "LO AL" and the alarm symbol will flash until the weather condition no longer
meets the user's set level. When the alarm is sounding press any key to mute the alarm.
Note: Because of the default settings already determined by the manufacturer it may not be necessary for the
majority of users to perform any further basic settings - except for Relative Air Pressure (see below).
Changes, however, can be easily made.
Wind
Press the MENU key three times to select the WIND section, the WIND section digits will start flashing. Press
the
UP or DOWN key to shift the display between A
Note: Average wind speed is the average speed over the 48 second period between signal transmissions. In
gusty conditions this may appear as though wind speed is being under reported as low winds and high winds
are averaged across the 48 second interval. Setting wind speed to Gust will display the maximum wind
speed during the 48 second period which can often be more meaningful in these conditions.
Press the ENTER key to select the following modes, then press the UP or DOWN key to set the value:
Wind speed units - select between km/h, mph, m/s, knots, bft.
Wind speed high alarm (press ON/OFF to enable/disable). If the alarm is enabled, an alarm symbol
appears in the display.
Wind direction alarm (press ON/OFF to enable/disable). If the alarm is enabled, an alarm symbol
the UP or DOWN key to change the
appears in the Time display section indicating the alarm
verage wind speed and Gust (default Average wind speed).
WS2083
- 9 -
When