DISCO DAC552 Manual de instalação - Página 16
Procurar online ou descarregar pdf Manual de instalação para Serra DISCO DAC552. DISCO DAC552 20 páginas. Automatic dicing/cutting saws
Imprimir página1. General Safety Precautions
General safety precautions
This section describes the general safety precautions that should be understood
before operation and observed during operation.
Machine installation environment
Comply with the recommended machine installation conditions (such
as room temperature, humidity or temperature of spindle coolant
water and wheel coolant water). If the machine is installed in an
environment that does not conform to the installation conditions
recommended by DISCO, rust formation may occur due to moisture
condensation or other factor, thereby adversely affecting the cutting
accuracy.
For the recommended environmental conditions, see section C-1 of
Installation Manual, [Installation Specifications and Environment].
- Responsibility for instructing workers
Instruct the workers who perform installation to read the safety
precautions set forth in the Installation Manual before proceeding to
work. Also, if the workers perform various tasks, direct them to read
the points of note concerning the safety given in the respective
manuals.
The written instructions for this machine are Installation Manual,
Operation Manual, Data Maintenance Manual, Maintenance Manual
and Technical Reference Manual.
- Responsibility for instructing workers who seem not to understand
the points of note
For the workers who seem not understand what is given in the
manuals, explain the safety items described in this chapter so that
they understand what the points mean.
- Regular inspection
The machine must be inspected on a regular basis.
If any accidents occur while an appropriate regular inspection
program is not adhered to, DISCO is not responsible for the results.
- Maintenance personnel
Maintenance must be conducted by qualified personnel who has
received the maintenance training.
CAUTION
NOTICE
A-2