Armytek Barracuda Especificações - Página 2

Procurar online ou descarregar pdf Especificações para Lanterna Armytek Barracuda. Armytek Barracuda 2 páginas.
Também para Armytek Barracuda: Manual do utilizador (2 páginas)

Imprimir página
Armytek Barracuda Especificações
Armytek Barracuda
General Features
Optical Features
1. The reflector of the ArmyTek Barracuda flashlight has been modeled and calculated in computer software for the design of
optical systems that enabled to produce a flawless light beam for a distance more than 500 meters.
2. Ultra-transparent and tempered glass was used with anti-reflective and lens coating, normally used in photo equipment only.
3. The transparency of the glass is 98-99%.
Electrical Features
1. World's first search and rescue flashlight has been designed on the basis of the new-generation electronic driver with FLAT
runtime technology.
2. Advanced electronic protection from incorrect battery installation, without reducing the efficiency of the driver.
3. Smooth light output. Important notice: no irritating flicker effects.
4. Ecological algorithm of the stabilization control, which decreases the power consumption, making the flashlight very effective.
5. Excellent runtimes for all modes because of high efficient electronics.
Ergonomic Features
1. The ability to use batteries with a flat contact.
2. Protection from switching on accidentally (special turn of the tailcap).
Mechanical Features
1. The flashlight has a strong, difficult to break body, which is developed for a minimum weight with sufficient durability. The design of
the body includes element design specifically to prevent the flashlight from rolling.
2. The flashlight is designed with the impact-resistant bezels from both sides in order to protect it from falling and allow utilization
during combat situations. In the Gold and Black version the steel bezels are also covered by titanium coating with a hardness of
2000-3000HV.
3. To ensure functionality in difficult conditions, the electronic driver of the flashlight is placed in a special aluminum capsule and has
been completely covered with durable compound. This actually protects it from both the environment and from mechanical damage.
4. Body cover: matte, anodized. Hardness: 350-400HV. Resistant to scratches and impacts.
5. Body material: aviation-grade aluminum T6061-T6.
Water resistance
1. Water resistance standard: IPX-8 (the highest)
2. An O-ring has been used to increase glass sealing, and well as an extra L-ring of a specific shape.
3. All threads, rubber parts and other parts of the flashlight that experience friction or contact with water are lubricated with a
special dense grease NyoGel 760G.
Service & Warranty
The ArmyTek flashlight is a complex product of technologies. To ensure correct and long-lasting operation it is necessary to
perform servicing.
1. Switching modes, setting up the flashlight and other functions are realized through a gold-plated contact ring. To ensure
a correct operation of the flashlight, the ring must be periodically cleaned (as it gets dirty), as well as the adjacent areas
of the circuit board, from dirt and the lubricant.
2. To improve the flashlight's water resistance it is necessary to periodically clean (as it gets dirty) the thread off old
lubricant and grease it again. Nyogel 760G is preferable: it is dense as gel, non-conductive, water resistant and not
corrosive to the rubber.
3. If you noticed that the flashlight is acting out, not responding to your commands, the light flickers etc., the first reason is
to change the batteries, and the second reason could be the contamination of the contact ring and the thread with the
old lubricant and traces of aluminum dust.
4. The clip can be removed after the tailcap of the flashlight is taken off and both O-rings are removed.
5. Use high-quality batteries to prevent the elements leakage inside your flashlight and other destructive effects. Remove
batteries from your flashlight if you do not intend to use it for a long time.
Armytek Optoelectronics Inc. Web: www.armytek.com
10 YEARS OF NO-HASSLE WARRANTY
Address: 67 Vandervoort Dr, Richmond Hill, Ontario, L4E 0C7, Canada
www.armytek.com