Discount Car Stereo JAGCD-HF Manual de instalação - Página 2

Procurar online ou descarregar pdf Manual de instalação para Recetor Discount Car Stereo JAGCD-HF. Discount Car Stereo JAGCD-HF 10 páginas. Bluetooth kit for jaguar xk and xj with cd changer
Também para Discount Car Stereo JAGCD-HF: Manual de instalação de início rápido (12 páginas)

Imprimir página

PRODUCT SAFETY & DISCLAIMER

READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE

PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY

•

This installation guide is provided as a GENERAL installation guide, some vehicles vary and

may require additional steps. We do not accept responsibility for third party labor charges

or modifications. Exercise due-diligence when installing this product.

•

We do not accept any responsibility for vehicle damage or personal injury resulting from

the installation of this product.

Careless installation and operation can result in equipment damage

•

Introduction:

Safety comes first when you're on the road, so having an intuitive and easy to

use Bluetooth kit is essential to reducing driver distraction. The BT45-JAG kit is

compatible with virtually all Bluetooth phones, and sounds great whether you are

using it for mobile conversations or music streaming. The system will mute

upon initiating or receiving a call and announces callers phone number on car

speaker. The wireless remote control conveniently installed on dashboard is

used to launch Voice Recognition application (Siri, Google Now, Assistant etc.),

initiate phone calls launch applications, track selection and more. Thanks to the

BT45-JAG Kit users keep the radio and car they love while enjoying Bluetooth

features only available on newer

cars.

The BT45-JAG requires a working CD changer (which remains connected

but will no longer play) and factory phone plug (under center armrest)

See Frequently Asked questions at the end of this guide

Notes:

- Vehicle must have a phone plug beneath armrest

- Required CD changer remains connected but will no longer play.

Audio Adapter Installation:

Remove carpet trim piece surrounding audio rack (See Fig. 1). If

vehicle does not have Navigation, use empty slot to access changer

connecting plug, however vehicles with Navigation or convertibles, may

require lowering audio rack (See Fig. 1) by removing (4) 8mm and

leaning rack forward to reveal wiring.

Fig. 1

Locate CD changer short (6 inch) pigtail cable (it's the only cable on

changer). This cable connects CD changer to radio (Standard audio

systems) or to amplifier (Premium audio system).

This is the cable required to complete install (See Fig. 1A)

Fig. 1A

plug/connector location

Remove cable from holding tab and disconnect CD changer by gently

(Do not wiggle or twist)

pulling apart