Discount Car Stereo iP2D-BKR Manual de instalação de início rápido - Página 10

Procurar online ou descarregar pdf Manual de instalação de início rápido para Unidade de controlo Discount Car Stereo iP2D-BKR. Discount Car Stereo iP2D-BKR 10 páginas. Music streaming module for becker radios with aux menu option
Também para Discount Car Stereo iP2D-BKR: Manual de instalação de início rápido (9 páginas)

Imprimir página

10. I'm getting noise that increases with engine speed. Is this normal?

If you experience alternator whine (increases with engine speed), we

recommend adding a noise filter (e.g. NF3A) to power/ground supply lines.

Here is how to install noise filter:

If necessary, remove black tape from harness.

(You will be working with black and red wires on black plug (to radio) See

Fig. 12— DO NOT CUT FACTORY WIRES

a. Cut red and black wire about 2 inches away from 8-pin plug

b. Connect filter OUT red wire to red wire (from module)

c. Connect Filter OUT black wire to black wire (from module)

d. Connect filter IN red wire to red wire (To filter In)

e. Connect filter IN black wire to black wire (To filter in)

Disclaimer

• This product has no affiliation with Porsche, Becker etc.

• We're not liable for misuse of this product.

•We recommend professional installation.

[email protected]

is subject to change without notice. Other products and companies referred to herein are

trademarks or registered trademarks of their respective companies or mark holders

Fig. 12