DiscountRamps Silver Spring ESC400 Manual de instruções - Página 2
Procurar online ou descarregar pdf Manual de instruções para Cadeira de rodas DiscountRamps Silver Spring ESC400. DiscountRamps Silver Spring ESC400 9 páginas. Deluxe electric powerchair and scooter carrier
Imprimir página
The license plate holder attaches to the top of the lift's power box using included hardware. Line up
the base of the holder with the mounting holes, install bolts, washers, and nuts, then tighten securely
with a wrench and Allen wrench. Attach the license plate to the bracket using existing hardware.
An anti-tilt device is included. This device stabilizes the lift when the lift is attached to your 2" hitch. It
prevents rocking by pinching the main tube of the hitch mounted product into the trailer's hitch. It is
required that this anti-tilt device is installed.
To install the anti-tilt device:
1. Slide the anti-tilt device onto the hitch tube of the carrier being in-
stalled with the flat side facing the end of the tube that fits into the
vehicle hitch.
2. Secure the carrier to the vehicle hitch.
3. Fit the anti-tilt device against the vehicle hitch.
4. Using an Allen wrench, make sure all bolts are tightened evenly and
securely.
CHECK LIST: Installing a powered mobility lift onto a vehicle may require the help of a professional
installer, especially if the desired vehicle requires the installation of a hitch receiver. The vehicle is
prepared for install and meets the requirements outlined in this section only if:
□ Vehicle has a working order 2" Class III/IV hitch receiver installed level to the ground
□ Power Mobility Lift is not damaged or missing parts
□ Vehicle suspension is capable of bearing lift weight - see formula below
Carrier Weight
154 lbs
Rev. 061218
Weight of Powerchair or Scooter
+
DiscountRamps.com • 1-888-651-3431
=
*Must NOT exceed manufacturer's
hitch tongue weight capacity
Page 2