Arnica Demli Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Utensílios de cozinha Arnica Demli. Arnica Demli 13 páginas.

Water Heating

• You can also use your device for water heating and boiling when necessary.

• Fill the kettle jug with water between the maximum and minimum levels, as in preparing tea and

place it on the power base, move the boiling button to the "I" position. After the water has boiled,

the red light will turn green in the warm-up function.

• After your device boils water for a short time, it switches to energy saving mode. As long as your

kettle jug is left to work this way, you will always have ready boiling water.

• Thanks to keeping warm function, the existing water can wait for a long time without evaporation.

• When water is added, the boil switch should be turned back on again to ensure boiling.

NOTE: The cover of your teapot can also be used as a cover for the kettle jug at the same time.

Security System

• The device automatically saves energy when water is boiled.

• Waterless Operation Protection; for safety reasons your device will stop automatically.

Calcification Removal

• It is important to check the calcination periodically in your kettle jug in terms of hygiene and

energy saving.

• The calc in the water used over time will accumulate on the heater base and burn down to form

a brown layer, which will reduce the efficiency of your heater.

• Soft scaling can be easily cleaned with a brush (do not forget to pull out the plug before doing

this).

• You can clean hard calcined deposits with lime removers or vinegar sold for home appliances

that can be purchased from the market.

• To remove with scale remover; After you have boiled some water in your device, mix the lime

dissolver into the boiled water. After waiting for a while, boil the heater for 2-3 minutes more and

empty the inside and wash it 2-3 times with clean water.

• To clean with white vinegar; fill your device with half a liter of white vinegar for 1 hour, then drain

the vinegar and clean your device 2-3 times with clean water.

• Place the plug of the device in the cable socket under the power base after removing the plug

cable from the socket.

• You can store the main body of your device by placing it on the power base.

CLEANING and MAINTENANCE

• Remove the plug from plug and let the appliance completely cool down before cleaning.

• Clean the jug with a damp cloth, never immerse the in water. Never put the appliance in a dish-

washer. Make sure that the electrical connections do not become damp.

• If the interior of the teapot has become severely discolored, the best way to clean it is with a damp

cloth and a little dishwashing soda, after cleaning, rinse the teapot very thoroughly.

• Do not immerse power cord, kettle and base in water.

• In order to maintain the outer surface, do not use abrasive cleaner to wipe the stainless steel

housing.