DISCOVER D904 Manual - Página 7

Procurar online ou descarregar pdf Manual para Auscultadores DISCOVER D904. DISCOVER D904 19 páginas.

•

Install the battery into the headset if not fitted.

The little line on the battery has to match the

line on the battery slot, otherwise the battery

will not fit.

•

The headset LED (1) will turn on for about

2 seconds then turn off. Now your headset is in

standby mode.

NOTE: The first time you use your headset, it is

recommended that the headset is charged for a

minimum of 4 hours before use.

2.1 Connecting to a telephone or terminal with a

headset port

•

Using the headset cord supplied with the

product, connect the 'TEL' port (15) on headset

base with the headset port on your telephone.

•

Use the power adaptor supplied with the

product to connect the headset base (13) to a

power socket.

•

You may need to adjust the wiring switch (16)

that is located on the side of the headset base

to find the correct wiring for your device.

2.2 Connecting to a telephone or terminal without

a headset port

•

Using the headset cord supplied with the

product, connect the 'TEL' port (15) on headset

base with the 'handset' port on your telephone.

•

Connect the telephone handset cord to the

handset (14) port on the headset base.

•