Blake UK PROAPE900 Manual de configuração - Página 4
Procurar online ou descarregar pdf Manual de configuração para Ponto de acesso sem fios Blake UK PROAPE900. Blake UK PROAPE900 13 páginas. 24v outdoor cpe
Imprimir páginaSet-up Guide (24v OUTDOOR CPE)
CPE The Bridge
Gateway mode:-
The AP will allocate IP numbers to the connected devices. This mode is default as it permits you to con-
nect and setup the AP very easily.
The AP could be left in this mode however, any connections to the AP (Wireless or not) will be allocated
different IP addresses to the main network, potentially preventing communication between devices on
the main network.
Repeater mode:-
The AP will receive & retransmit the Wi-Fi signal from another device.
It performs the same role as Access Point mode, but the key is that it talks over Wi-Fi instead. As such,
this doesn't get around obstacles as well as an access point does. While an access point can be put in
front of an obstacle, a repeater will need to be angled around it. However, the benefit of repeaters is
that they don't need a cable to connect to the central hub.
WISP mode:-
Wirelessly connects to a WISP (Wireless Internet Service Provider) AP. In this mode, the AP also acts
as a router for wired clients on your LAN and provides NAT (Network Address Translation) and a DHCP
server to generate IP addresses for wired clients only. NAT and the DHCP server allow many comput-
ers to share the same wireless Internet connection.
AP mode:-
Using Access Point mode is ideal if you want to extend the Wi-Fi range and CPE you're using to extend
it isn't far away from the main central router. The cable will ensure you get the best possible speeds be-
tween the access point and the router and the Wi-Fi will be transmitted in the direction of the antenna
face.
Super WDS mode:- Standard
(Default mode of operation for automated binding)