3D Hobby Shop 57" Extra 330 SC Manual de montagem - Página 7

Procurar online ou descarregar pdf Manual de montagem para Brinquedo 3D Hobby Shop 57" Extra 330 SC. 3D Hobby Shop 57" Extra 330 SC 16 páginas.

7
Install the carbon wing spar tube into the fuselage (Note – never glue the carbon wing spar tube to the
airplane, it is designed to be removable). Install the wings temporarily. Measure as shown in the
illustration. Make sure this measurement is the same on both sides.
When stabilizer is centered and aligned, drip Thin CA glue onto the stab-to-fuselage joint top and bottom.
NOTE: We do not remove any covering form the horizontal stabilizer. This keeps the stabilizer strong,
and thin CA makes an excellent joint to covering material. If your stab joint is not tight enough for thin CA
glue, or if you have to trim the opening to align the stab, you can use thick CA glue as well.