AROFLY Cadillock Power K2000 Manual do utilizador - Página 6

Procurar online ou descarregar pdf Manual do utilizador para Arrancador remoto AROFLY Cadillock Power K2000. AROFLY Cadillock Power K2000 12 páginas. Multifunction jump starter 12 volts

Imprimir página

D. Notes on the performance display

Percentage of charging in flash, which is indicating it is charging. When the

CADILLOCK POWER K2000 battery is fully charged, the screen will show 100%

and stop running.

E. How to jump start the vehicle

Tap the power button for 3 seconds to turn ON. The display will show the

power of the CADILLOCK POWER K2000.

If the power symbol is less than 75%, please do not jump start a vehicle. Use

the CADILLOCK POWER K2000 only after it is fully charged more than 80%.

How to use the smart cable to jump start the vehicle:

The smart cable clamps can recognize the vehicle's battery voltage

automatically. It is equipped with a beeper and different LED lights to remind

the user of the different safety protections, such as, reverse polarity, short

circuit, over current, under voltage, reverse charging etc.

Steps:

Please check that the cables and connectors are correct for the vehicle

you are attempting to start.

Insert the blue plug of the smart cable into the ignition port of CADILLOCK

POWER K2000 and check the LED indication on the smart convertor

box as below:

a. The small LED is on the bottom right of the Smart Converter Box

b. Red /Green LED flash => the CADILLOCK POWER K2000 has

enough power to jump start the car.

c. Steady Red LED and continues beep sound => The CADILLOCK

POWER K2000 needs to be recharged first.

Once connected with the car battery, the LED will show as below:

a. Correct Connection:

The smart convertor box will show a steady Green LED; this means that

the CADILLOCK POWER K2000 is ready to jump start the car.

b. Wrong connection :

The smart convertor box will show a steady Red with several beep

sounds.

Never start the vehicle when the light is a steady red with beep

sounds, this is a warning that the connection is not correct or the

protective function is activated.

After Jump Starting the car, the smart convertor box will disconnect the

power in 3 seconds, and the LED will show a steady Red with beep

sounds to remind the customer to remove the CADILLOCK POWER

K2000 and the clamps from the car battery

D. Notes on the performance display