CUBETAPE PRO Manual de início rápido
Procurar online ou descarregar pdf Manual de início rápido para Instrumentos de medição CUBETAPE PRO. CUBETAPE PRO 3 páginas.
Também para CUBETAPE PRO: Manual de início rápido (2 páginas)
Imprimir páginaCubetape PRO Quickstart Guide
Exterior Overview
Press to record measure
Scan barcode
Power On/Off
To turn on the device, once press
To shut down the device, press
"power off" is indicated on screen (or 5 beeps are heard).
Insert Pallet
While the cursor is in the length field, press
Return to Last Recorded Data
Press
several times until the cursor is in the length field;
Press
will display the last recorded measurement on screen.
Append
The append function enables the operator to sum three measurements of length together, especially
when the item length is longer than the 3 meter tape.
After measuring length 1, press
Measure length 2 and length 3;
Record appended measurement by pressing
The length recorded will be the sum of length 1, 2 and length 3.
www.cubetape.com
USB Portal
Charge Light
LED
Send data record
Append; save data
.
for approximately 3 seconds, then release when
or
to insert the default pallet length and width.
to append;
or
Tape Tip
Tape Tip
Rubber Boot Protective
Backspace; power on/off
All buttons can be used for navigation
under menu mode except for
;
Battery Compartment
Tape Cassette
.
1