3D LabPrint Avion Airplanes Duck Manual do utilizador - Página 2
Procurar online ou descarregar pdf Manual do utilizador para Brinquedo 3D LabPrint Avion Airplanes Duck. 3D LabPrint Avion Airplanes Duck 13 páginas.
Imprimir página
Avion
airplanes
What you need
Filament
PLA LW / POLYLIGHT 1.0
PLA
Hardware
ø1x285mm carbon rod (fuselage)
ø1x571mm carbon rod (wing front)
ø1x487mm carbon rod (wing back)
ø1x361mm carbon rod (elevons)
ø2x385mm carbon rod (elevons axles)
Steel wire, carbon rod or clevis (pushrods)
Snap-off knife
CA glue
Activator
Motor
HGLRC Aeolus 2004 1800Kv (my setup)
or similar 20XX size motor
ESC
iFlight SucceX-E Slick 45A (my setup)
or similar (with or without BEC)
BEC
iFlight Micro 5V 3A (my setup)
external BEC is optional
Servos
Corona DS-843MG (my setup, recomended)
Propeller
HQPROP T5X3 (my setup)
or similar 5" or 6"
Main bat.
CNHL Ministar 450mAh 6S 70C (my setup)
or 40x18x72mm (max. size for main battery)
RX bat.
Turnigy Nano-Tech 460mAh 2S (my setup)
RX battery is optional
RC
at least 3 channel RC system (elevon mix)
DUCK user manual
Profiles
2x
2x
Prusa Slicer
2x
2.4.0
2x
2x
Cura
4.13.0
1x
Before printing big parts make sure, that everything
1x
will fit perfectly (carbon rods etc.)
1x
2x
1x
1x
1x
f
Avion Airplanes
Possible to print with Prusa Slicer 2.4.0 and Cura.
Use 3MF files as starting
point to find sweet spot with
your printer.
Use included Cura profiles as
starting point to find sweet
spot with your printer.
I
avion_airplanes
2