CubuSynth Engine Manual de construção - Página 9
Procurar online ou descarregar pdf Manual de construção para Equipamento de música CubuSynth Engine. CubuSynth Engine 20 páginas. Dual complex vco with wave shaping and modulation features
Imprimir páginaCubuSynth Engine - Build Guide
STEP 6 (Main PCB)
IC sockets
Look for the dip-8, dip-14 and dip-16 sockets.
Orientation is important to know how to place the ICs later! The place for the notch is marked
on the PCB as "D shape" or with a dot on pin 1. In the picture below it is marked with a pink dot.
You can use tape to hold them in place, put the other PCB on top or bend 2 pins of each socket
inwards, so they don't fall when turning the board around. Then solder everything.
5
IC Socket 16pin
8
IC Socket 14pin
1
IC Socket 8pin
In this image, you can see the method of using the "control
PCB" to hold the IC sockets in place while turning around the
board.
Page 9
PCB V1.1 May 2022