Dish Network Hopper Joey Ativação e configuração do sistema
Procurar online ou descarregar pdf Ativação e configuração do sistema para DVR Dish Network Hopper Joey. Dish Network Hopper Joey 4 páginas.
Imprimir página
Hopper Joey System Activation and Setup
Hopper setup steps are different than ViP!
If these steps are not correctly followed, setup time will be significantly extended and potentially require equipment replacement!
Do NOT plug coax cables into any Joey until the Hopper displays live TV!
When activating Hopper receivers, technicians will receive either the Attention 015 or Attention 833 messages.
Follow the appropriate activation steps listed below for the message received.
Attention 015 (Hopper: No Installation Wizard Appears)
Do NOT run a check switch test!
Using the front panel buttons:
•
Press Menu
•
Choose the Settings tile
•
Choose the Factory Defaults tile
•
Select Yes (On the Warning 093 screen)
•
The Hopper will reboot and Attention 833 appears
•
Follow the activation steps for Attention 833
(Hopper Joey Systems will not properly activate if the ViP process is followed.)
Attention 833 (Hopper: Installation Wizard Appears)
Do NOT select Cancel!
•
•
•
•
•
•
(Failure to comply will prevent the Joey from linking to the Hopper.)
Wait for Attention 833 to complete
Wait for Attention 015 to complete
Follow the installation wizard steps to the activation screen
Activate through DASH or a call center agent; New Connects can also
be activated in ETAdirect
Activate ALL Hoppers and Joeys at the same time
Do not activate Hoppers or Joeys until prompted by the wizard
o
Do NOT plug in Joeys at this point!
o
Follow the remaining installation wizard steps
Ver. 032312 Page 1 of 4