AromaMist AI-5 Manual de instalação e operação - Página 5

Procurar online ou descarregar pdf Manual de instalação e operação para Bomba de água AromaMist AI-5. AromaMist AI-5 15 páginas.

C. Electrical

AromaMist

pump model AI-5 is a 120V AC pump and has a voltage regulated

internal power supply capable of operating in the range of approximately 95 to

135 VAC. Use a supply voltage of 100 to 120 VAC for best results. The 3-wire

grounded plug must be used with provided power supply module in a 3-wire

grounded wall outlet.

CAUTION: Never remove ground wire from plug.

CAUTION: Do not position power supply cord in direct contact

with steam line.

D. Plumbing

1. Tubing Connections

AromaMist

The

predictable metering output. This predictability can only be maintained if all fitting

sizes remain unaltered. Do not attempt to reduce tubing size. All tubing

connection should be double checked to insure against leakage.

CAUTION: Do not position tubing in direct contact with steam

line.

NOTE: When cutting lengths of tubing for your installation, ensure a

clean, square cut. Use short lengths of tubing whenever possible.

2. Tubing nuts

Do not over tighten tubing nut connectors. Tighten no more than ¼" turn after

the fitting contacts the seal. Hand tighten only. Do not use a wrench or pliers

as they may damage the fittings.

except on 3-function valve NPT fitting. Be sure to observe applicable local

plumbing codes.

WARNING: Clear flexible vinyl priming tubing is not intended for

pressurized or pump discharge use.

3. Tubing Connections

pump uses carefully matched components to achieve a

(See diagram below.) Do not use Teflon tape

Page