Dishlex DX103 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Máquina de lavar loiça Dishlex DX103. Dishlex DX103 16 páginas. Freestanding dishwasher
Também para Dishlex DX103: Manual do utilizador (16 páginas), Manual de instalação (3 páginas)

Imprimir página

Fault code and malfunction

• continuous flash of the start/cancel

indicator light

• 1 flash of the 'Finished' indicator light

The appliance does not fill with water

• continuous flash of the start/cancel

indicator light

• 2 flashes of the 'Finished' indicator

light

The appliance will not drain

The program does not start

After the check, switch on the appliance. The program

continues from the point of interruption. If the malfunc-

tion shows again, contact your Customer Care Centre.

For other fault codes, not described in the chart, contact

your Customer Care Centre.

These data are necessary to help you quickly and cor-

rectly:

• Model (Mod.)

The dishes are not clean

The dishes are wet and dull

• The water tap is blocked or furred with limescale.

Clean the water tap.

• The water tap is closed.

Open the water tap.

• The filter in the water inlet hose is blocked.

Clean the filter.

• The connection of the water inlet hose is not correct. The hose

can be kinked or squashed.

Make sure that the connection is correct.

• There is a blockage in the sink spigot.

Clean the sink spigot.

• The connection of the water drain hose is not correct. The hose

can be kinked or squashed.

Make sure that the connection is correct.

• The appliance door is not closed.

Close the door.

• Mains plug is not connected.

Plug-in appliance to the mains.

• The fuse has blown out in the household fuse box.

Replace the fuse.

• Product number (PNC)

• Serial number (S.N.)

For these data, refer to the rating plate.

Write the necessary data here:

Model description : ..........

Product number : ..........

Serial number : ..........

The cleaning results are not satisfactory

• The selected washing program is not applicable for the type of load and

soil.

• The baskets are loaded incorrectly so that water cannot reach all surfaces.

• Spray arms do not turn freely because of incorrect arrangement of the

load.

• The filters are dirty or not correctly installed.

• The quantity of detergent is too little or missing.

• No rinse aid has been used.

• The rinse aid dispenser is empty.

Possible cause and solution