Disney Pixar Cars Luigi's Casa Della Tires Playset Instruções - Página 3
Procurar online ou descarregar pdf Instruções para Brinquedo Disney Pixar Cars Luigi's Casa Della Tires Playset. Disney Pixar Cars Luigi's Casa Della Tires Playset 4 páginas.
Imprimir página
3
FEATURES (CONTD.)
BATTERIES – NORMAL MODE
Slide power switch to NORMAL MODE. A short light show begins. To restart the light show,
press the function button. Press the button to change the pattern of the lights. Press the
button again to turn all the lights off. The cycle of (1) lights on, (2) pattern change and (3)
lights off continues with each press of the button. If the button is not pressed and the set is
left idle, the light show will stop automatically after a while. During the light show, press and
hold the button for over 2 seconds to play a longer light show.
BATTERIES – LIGHT SENSOR MODE
Slide power switch to LIGHT SENSOR MODE. The light show will begin after 3-4 seconds if the
room is dark enough. Press the function button to change the pattern of the lights. Turn the
room lights on or press the button again to end the light show. A subsequent press of the
button or turning the room lights on and off will restart the light show. The light show will
stop automatically after a while if the set is left idle.
The play set also works with the following AC/DC power adapters (sold separately, subject to
availability):
• RCA AC/DC adapter model # AH56R (Walmart.com)
• Hosa AC/DC adapter model # ACD477 (Amazon.com)
NOTE: The battery power will be suspended when an adapter is used with the play set.
To resume using batteries, disconnect the adapter from the set.
AC/DC ADAPTER – NORMAL MODE
When an AC/DC adapter is used in NORMAL MODE, the light shows are longer. Everything else
is the same as using batteries. Please see the instructions for "BATTERIES – NORMAL MODE" .
In this mode, during the light show, press and hold the button for over 2 seconds to play the
show continuously!
AC/DC ADAPTER – LIGHT SENSOR MODE
When an AC/DC adapter is used in LIGHT SENSOR MODE, the light show will stay on as long as
the room lights stay off. Everything else is the same as using batteries. Please see the
instructions for "BATTERIES – LIGHT SENSOR MODE".
NOTE: For proper function, slide power switch to OFF before disconnecting the adapter from the play set.
NOTE TO ADULTS: Periodically examine the adapter for damage to the cord,
housing or other parts that may result in the risk of fire, electric shock or
injury. If the adapter is damaged, do not use it.
3
ADAPTER SPECIFICATIONS:
Input voltage: 110V/220V AC
Frequency:
50-60 Hz
DC output voltage: 4.5 - 6V
DC output current: 500mA
Plug size: 2.1mmx5.5mm jack
Plug type: