Aerial AD 740 Series Manual de instruções - Página 10

Procurar online ou descarregar pdf Manual de instruções para Desumidificador Aerial AD 740 Series. Aerial AD 740 Series 15 páginas.

Aerial AD 740 Series Manual de instruções

6.Operating conditions

AD-condensation dryers are suitable for the effort on construction sites, in
residential buildings, in swimming halls, in garages and storerooms. AD-
condensation dryers work problem-free at the temperature range of +3 to +32°C
and in the case of relative humidity from 40% to 95% r.h. .
Optional the unit is deliverable with included ThermoLogic (opt. extra). In this way,
the device turns off at inadmissible temperatures and on again at more permissibly
temperatures automatically.
The use in rooms with higher temperatures leads to disadvantages at the
compressor. The use in rooms with lower temperatures is ineffective and can lead
to icing.
Also the storage of the dehumidifier at inadmissible temperature conditions can lead
to damages / problems while immediate switch-on. Therefore, make possible short
time for adaptation for the device before switch-on.
ATTENTION:
The appliance must not be used under the following conditions:
Ø in rooms of potentially explosive atmosphere
Ø in rooms of aggressive atmospheres, for example ammonia and wood acid
Ø In rooms with water which shows a pH-value outside of 7,0 to 7,4. Remark: In
The case of lower pH-value, corrosion occurs at all metals and damages occurs
at mortar containing materials. In the case of higher pH-value, it comes to irritation
of skin and eye mucous membrane and extreme lime deposits.
Ø In rooms with salt or salty liquids. Salt content > 1% (also sole baths).
Ø In rooms of air treated with ozone
Ø in rooms featuring a high concentration of solvents
Ø in rooms of an extremely high ratio of dust.
In the case of doubtful operating conditions it is recommended to contact the
Technical Department of Messrs. AERIAL or a specialized dealer.
Using an AD-air dryer under inadequate operating conditions will entail that
the warranty becomes null and void.

7.Technical data

Among other things, many different components which are installed in the
condensation dryer decide on the capacity of the device. Since these components
can never be completely identical, in accordance to DIN EN 810 the capacity may
deviate up to 5% of specified capacity.
General:
Operational range:
Protection class:
Voltage :
+3°C up to + 32°C / 40% r.h. up to 95% r.h.
IP 44
230 V / 50 Hz
Page 10 of 15