3D Systems ProJet MJP 5600 Manual de instruções original - Página 5

Procurar online ou descarregar pdf Manual de instruções original para Impressoras 3D 3D Systems ProJet MJP 5600. 3D Systems ProJet MJP 5600 18 páginas.

Imprimir página
Facility Guidelines
This section provides detail relating to site selection, site preparation and readiness of the facility to
accept and install the printer. Discuss the appropriate equipment locations with a 3D Systems'
representative, so that the equipment is located in a convenient, appropriate location based on your
organization's needs. When planning an installation, consider:
• Space Planning
• Access Area Surrounding Printers
• Unit Portability
• Electrical
Printer Weight and Dimensions
Printer Weight and Dimensions
Weight: 935 kg, (2060 lbs)
Dimensions (H x W x D) 162 x 170 x 90 cm, (63.8 x 66.9 x 35.4 in.)
Printer Weight and Dimensions, (Crated)
Weight: 1180 Kg, (2600 lbs.)
Dimensions (H x W x D) 203.2 x 200.7 x 165 cm, (80 x 79 x 65 in.)
Space Planning
Below is a suggested floor plan for the printer installation. Each printer requires use of a dedicated
circuit. Multiple printers CAN NOT be located on a single circuit. An additional 110 or 220 VAC outlet is
recommended for service needs.
The outlet location must be near the printer and remain accessible to the end user at all times.
The printer MUST be placed on a vibration free concrete floor. Do not install on any other floor covering
such as vinyl, tile, carpeting, etc.. Doing so WILL affect machine performance.
• Client Workstation Requirements
• Network Interface
• Material Storage
• Material Bottle Disposal