ABBOTT & ASHBY 808438 Manual de instalação - Página 14

Procurar online ou descarregar pdf Manual de instalação para Moedor ABBOTT & ASHBY 808438. ABBOTT & ASHBY 808438 20 páginas. Linisher

Imprimir página
TRACKING:
Turn the unit on and inspect the movement of the belt. If adjustments are required move the
lever into the loose position (A) To correct any tracking concerns simply turn the knob (B) to
adjust the tracking and once adjusted lock the lever gently back into place (C).
A
F
E
A
G
B
Attach the tool rest (A) to the bracket (B) using the long fastener (G) and the Large Washer
(C) and wing nut (D). then attach this to the bench grinder using the 2 x small washers (E)
and 2 x short fasteners (F), allowing no more than 2mm gap between the grinding wheel
and tool rest (A).
Abbott & Ashby Linisher Installation Manual
EYESHIELD:
C
A) Bracket
B) 2 x Washers
B
C) Short Fastener
D) Wing Nut
E) Spring Washer
D
F) Long Fastener
G) Eye Shield
Use the wing nut (D) and 1 x washer (B) secure the eyeshield
G
to the bench grinder allowing no more than 2mm gap
between the grinding wheel and bracket (A)
C
TOOL REST:
D
A) Tool Rest
B) Bracket
C) 1 x Large Washer
D) Wing Nut
E
E) 2 x Small Washers
F) 2 x 8mm Fasteners
F
G) Long Fastener
14