Abbra Home Control Manual de início rápido - Página 7
Procurar online ou descarregar pdf Manual de início rápido para Painel de controlo Abbra Home Control. Abbra Home Control 8 páginas. For abbra home control; abbra campus; abbralink
Também para Abbra Home Control: Manual de início rápido (20 páginas)
Imprimir página5. Lights can turn on and off according to
a predetermined schedule to make your
home look occupied while away on
vacation.
6. Turn lights on or off while away from
your home using your cell phone.
With the addition of X10 lamp modules,
appliance modules, electrical outlets and
light switches you will be able to control
most of the day to day events from the
convenience of your cell phone.
A day in the life of an Abbra
customer....
Scenario 1 The Morning Rush
Each working day, it was always the
same process to be ready for work: Bill
turned on the lamp next to his bed,
opened the bedroom drapes, switched on
the bathroom lights and turned on the
heat lamp so it would be comfortable
after he took his morning shower, then
went to the kitchen for breakfast. One
day, Bill discovered a wonderful way to
get rid of these redundant tasks, easily
and reliably: the Abbra Home control
system
Thanks to Abbra, Bill could set all
these actions just as he needed:
• at 6.55 am, the alarm rings,
• 5 minutes later, the bathroom heat
lamp is switched on, as well as the
lights in his bedroom, in the kitchen, in
the bathroom, and the drapes open.
• 10 minutes after leaving for work, the
heat lamp and all the lights are turned
off automatically.
Now Bill's "waking up" is more peaceful.
Thanks to Abbra, he even gets to lay in
bed 10 minutes longer.
Taking advantage of off-peak hours
electricity is quite difficult in our busy
lives, because the lowest rate always
applies during unpractical periods of time
at night, when the whole family is
sleeping.
Avoiding energy waste is also a hard
discipline; all the members of the family
must remember to turn off certain electric
appliances and lights before leaving a
room for a long period!
Thanks to Abbra, a lot of domestic tasks
are automatically realized when the
energy cost is at its lowest. No need to
remember, as Abbra will remember for
you!
To realize this application, you
need:
•
PAM01 Appliance module (Qty:
several units) - Plug all the electrical
appliances you wish to control by
setting, in an appliance module.
Give each PAM01 the same House
Code ( i.e. A) and a specific Unit
Code ( 1 - 16)
•
PLM03 Lamp module (Qty: several
units) - Plug all the table lamps you
wish to control by setting in a lamp
module. Give each PLM03 the same
House Code (i.e. A) and a specific
Unit Code (1 - 16)
•
NOTE: All lights that are turning on
and off in unison can have the same
Unit Code.
•
Go to
www.myabbra.com
and select
the Automation link.
•
Assign each of the Automate fields
the appropriate House Code and
Unit Code to match the House Code
and Unit Code you have selected on
the PAM01and PLM03.
•
Assign each Trigger field the trigger
that will cause the light to turn on or
off. This can be activation by
passing in front of a motion detector,
opening a door, by a schedule or by
an event such as arming the
system.
Trigger Options
ARM AWAY (upon AWAY arming).
ARM HOME (upon HOME arming).
DISARM (upon disarming).
Once you have received your temporary
password for your online account, you
can return and set up your personal
details.
On the email detailing your password,
click the URL link which will take you to:
www.myabbracom
Enter your log in name – this is the email
address you used to Register along with
the temporary password provided by
NextAlarm. You will immediately be
prompted to change your password to
something more memorable to you. You
will also be asked to pick a security
question, in case you ever forget your
password. Continue with the account set
up by confirming your personal details
and the details of your Abbra system
sensors. Ensure all details are correct.
You will now be given a X-digit Account
Number. Take a note of this number. It
will also be emailed to you for your
records.
Step 5 – Completing the
Control Panel Installation
Easy Tabletop Placement: To
Attach the Abbra Tabletop Feet turn your
Abbra control panel over so you are
looking at the back of the unit. The
connector section should be at the top.
Affix the self adhesive rubber feet to the
base of the unit in each corner of the
control panel.
Take the Phone Cable and insert into
the jack labeled LINE on the back of the
Control Panel. If a phone occupied the
wall jack prior to plugging in the Abbra,
insert the telephone cable into the jack
labeled SET on the back of the Control
Panel
Optional Wall Mounting Your
Abbra
Gently release and remove the battery
cover.
Remove the screw which holds the
bracket in place.
Remove the wall mounting bracket
from the back of the Control Panel.