Acoustic Energy AEG05/P5 Manual do Proprietário - Página 11
Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Acoustic Energy AEG05/P5. Acoustic Energy AEG05/P5 16 páginas. Powered 5.1 surround sound speaker system
Imprimir página
The following pages provide information on the operation of
AEGO
5. The AEGO
5 was purposely designed to be simple to
P
P
operate with all functions available from the remote control.
AEGOp5 Operation
- LCD and LEDs
1. Press the power button to turn the AEGO
press it again to turn it off.
2. When power is turned off but still connected to the mains:
a. LCD display and Speaker Configuration LEDs are off.
b. Decoder status and user configurations are stored.
c. Once the power is turned on again, AEGO
to its previous decoder status and user configurations.
3. When power is turned off and the unit unplugged from the mains:
a. LCD display and Speaker Configuration LEDs are off.
b. Decoder status and user configurations are not stored.
c. AEGO
5 will reset to factory defaults if the adaptor
P
is reconnected to the mains.
AEGOp5 Operation
- LCD Display
Auto Decode Mode (Auto detection of input type)
When AEGO
5 is turned on, it automatically detects and identifies the
P
audio signal coming from source unit.
Playing a DVD title with Dolby Digital (AC3) format,
the display shows the following information.
DOLBY DIGITAL CO
SURROUND
Playing a DVD title with DTS format, the display shows
the following information.
DTS COAXIAL
SURROUND
Playing DVD, CD, LD, VCR and games consoles connected to the
analog inputs (LINE, AUX1 and AUX2), the display shows
the following information.
PCM LINEIN
STEREO
AEGOp5 Operation - Mode
Selection
Surround Processing Modes:
The versatile AEGO
5 surround sound processor is capable of
P
processing both the digital or analog audio signals from many
different types of audio source. With the equipment connected
correctly, AEGO
5 automatically detects the type of digital signal
P
present at the digital input.
AEGOp5 Operation
5 on,
P
5 will resume
P
10
AEGOp5 Operation
- Input Selection
Input Selection
The AEGO
5 can be connected to up
P
to 5 audio sources. Select the input
source you want by repeatedly
pressing the INPUT Button on the
remote control until the desired
source is selected.
In the Digital Mode (Dolby Digital / DTS), you can manually select the
audio input source either in coaxial or optical form depending on the
input type.
If "COAXIAL" is selected, the display shows the following information:
DOLBY DIGITAL CO
SURROUND
If "Optical" is selected, display of AEGO
the following information:
DOLBY DIGITAL OP
SURROUND
In the PCM mode, you can switch between 3 audio input sources
such as CD Player, VCR, game consoles etc. (See page 8 or page 9
for reference). The display shows the following information:
PCM
LINEIN
STEREO
PCM
AUX1
STEREO
PCM
AUX2
STEREO
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
5 shows
P