CAMDEN CV-550SPK V3 Manual de instruções de instalação
Procurar online ou descarregar pdf Manual de instruções de instalação para Teclado CAMDEN CV-550SPK V3. CAMDEN CV-550SPK V3 7 páginas. Waterproof keypad/reader/controller
Imprimir página
D o o r Ac t iv a ti o n D e v i c e s
CV-550SPK V3
Waterproof Keypad/Reader/Controller
INSTALLATION INSTRUCTIONS
THIS PACKAGE INCLUDES:
(1) Keypad CV-550SPK V3
(1) User Manual
(1) Screw driver
1. DESCRIPTION
The CV-550SPK V3 is a back-lit single door multifunction standalone
access control keypad with a Wiegand input/output interface.
It is suitable for mounting either indoors or outdoors in harsh
environments. It is housed in a strong, sturdy and vandal proof Zinc
Alloy electroplated case. The supplied shield will provide greater
visibility of the illuminated status LED'S as well as keeping weather
elements off of the face of the keypad. The electronics are fully potted
so the CV-550SPK V3 is waterproof and conforms to IP68.
The CV-550SPK V3 supports up to 20,000 users in either a Card, 4-to-
6-digit PIN, or a Card + PIN option. The built-in card reader supports
125KHZ HID 26/34/37-bit cards/tags, as well as the EM format. The
PIN output data can be configured for either 26 bit, 4-bit or 8-bit burst
modes making it compatible with most Access systems.
These features make the CV-550SPK V3 an ideal choice for door
access for commercial and industrial applications such as factories,
offices, warehouses, laboratories, banks, and prisons.
2. SPECIFICATIONS
10 - 28V AC/DC
Input Power
Standby Current
35mA (Input VDC12V)
Operating Current:
100mA (Input VDC12V)
Working Humidity
0-95%
Working
-40°C - 60°C (-40F – 140F)
Temperature
Alarm Output
1A @ 30VDC
(Digital)
Lock Relay
1A @ 30VDC
Read Range
5 cm
Users
20,000
Reader Format
HID/ EM
Reader Bit Pattern
8 Bit Burst, 26, 34 or 37 bit
Keypad Format
26 bit standard, 4 bit or 8 bit burst
IP Rating
68
(4) Wall plugs
(6 x 27 mm, used for mounting)
(4) Self tapping screws
(3.5 x 27 mm, used for mounting)
2 3/8"
[61mm]
Surface Mounting
Hole
3 1/4"
Single Gang
[83mm]
Mounting Hole
Single Gang
Mounting Hole
Surface Mounting
(2) 6-32x1" Pan head machine
screws to mount to single gang
switch box.
3. DIMENSIONS
3 1/4"
[82mm]
5"
[127mm]
2 3/8"
2 3/8"
[61mm]
[61mm]
Surface Mounting
Hole
3 1/4"
3 1/4"
Single Gang
[83mm]
[83mm]
Mounting Hole
Single Gang
Mounting Hole
Ø1/8"
Surface Mounting
[4mm]
Hole
6 Places
3 1 2 "
4 1/8"
[90mm]
[104mm]
Surface Mounting
Hole
Ø1/2"
[13mm]
Note:
When the keypad is idle the LED is solid RED. In
Wire Harness
programming mode, the LED is flashing RED. The Master code
Access
for programming must be changed to configure any part of the
CV-550SPK and its parameters. All changes must be done within
programming mode.
Surface
Mounting
1 1/8"
[29mm]
3 1 2 "
[90mm]
Surface Mounting
Hole
Ø1/2"
[13mm]
Wire Harness
Access
Ø5/8"
[16mm]
Surface
Mounting
Hole
5 7/8"
[150mm]
5 7/8"
[150mm]
Page 1 of 7