CAME F7024N Manual de instalação - Página 6

Procurar online ou descarregar pdf Manual de instalação para Abertura de porta de garagem CAME F7024N. CAME F7024N 16 páginas. Operator for swing gates
Também para CAME F7024N: Manual de instalação (17 páginas), Manual de instalação (17 páginas)

Imprimir página

INSTALLATION

⚠ The following illustrations are just examples, in that the space available for fitting the operator and accessories varies depending on the overall

dimensions. It is up to the installer to find the most suitable solution.

 The drawing show an operator fitted on the left. Install the operator on the right, symmetrically.

Corrugate tube laying

Lay the corrugated tubes you will need for the cables coming out of the junction pit.

 The number of tubes depends on the type of system and the accessories you are going to fit.

You need to lay two corrugated tubes where the operator is fitted.

Applying the pillar bracket and A gate bracket

- Secure the pillar bracket to the pillar using M8 screws and ø14 mould inserts making sure the minimum distance of 100 mm from

the ground is met.

- Fix gate bracket "A" (with M6 screws or by welding) to the gate leaf making sure the measurements mentioned in the table on page

3 and the 68 mm uneveness between the two brackets are met.

Post Bracket

ø 14

Gate "A" bracket