CAME 001CS1PLCO Manual de instalação - Página 11

Procurar online ou descarregar pdf Manual de instalação para Sistema de intercomunicação CAME 001CS1PLCO. CAME 001CS1PLCO 16 páginas. Audio entry kit
Também para CAME 001CS1PLCO: Manual de instalação (16 páginas)

Imprimir página
CAME 001CS1PLCO Manual de instalação
h

Reprogramming procedure

PROG
a
SW3
beep
e
f
i
Exiting programming. Briefly press the PROG key g: the PROG LED off. NOTE. If no action is performed, the procedure will automatically end after 30 minutes.
Programming key type. At the "Programming Call Buttons" stage, press the PROG h key for at least 3 seconds and then release it (within 6 seconds), as
soon as the LED PROG lights up and the key back lighting flashes as illustrated in figure i, entering "Programming Button Types/Combinations" as part
of the procedure.
Press the first key of the entry panel in the position indicated  until the backlighting LED stops flashing  and remains lit.
At the end, exit programming, briefly press the PROG key g: the PROG LED will turn off. If no action is performed, the procedure will end automatically
after 30 minutes.
i
>3''
Entering Programming Mode. Press the PROG a key for at least 3 seconds and then release it (within
6 seconds) as soon as the LED PROG light flashes and the key back lighting lights up as illustrated in
<6''
figure . Failure of the PROG LED to light up, indicates a malfunction. Check the connections and
re-access the programming mode.
PROG
c
SW3
Programming the call keys. Lift the receiver (if present) of the extension that you want to programme
c then press the door lock release
key to be associated with the internal extension e: an acoustic signal will confirm that the setting
was stored. Hang up the receiver again, if necessary f and continue, repeating the same operations
for the other extensions.
g
PROG
SW3
BOUT
<1''
PROG
SW3
<1''
PROG
SW3
M1
M2
Exiting programming. Briefly press the PROG
key i: the PROG LED off. NOTE. If no action is
performed, the procedure will automatically end
after 30 minutes.
and AUX2  buttons. On the entry panel, press the call
h
M1
BOUT
>3''
<6''
PROG
SW3
M2