Acoustic Research AWSBTSK Manual do utilizador - Página 4
Procurar online ou descarregar pdf Manual do utilizador para Altifalantes Acoustic Research AWSBTSK. Acoustic Research AWSBTSK 6 páginas. Portable wireless speaker
Imprimir página
Setting Up Bluetooth Wireless
Streaming Audio With Bluetooth
Once you've paired and connected your device with the speaker, you can control music
playback from the palm of your hand. Select your music, stop it, change songs and
playlists, all right from your device's screen.
To adjust volume: Press the Vol +/– buttons on top of the speaker.
To disconnect from the speaker: Either turn Bluetooth off on your device or choose
"Disconnect" from the list of options in your device's Bluetooth settings.
To reconnect with the speaker: Just turn the speaker on and wait a few seconds for the
speaker to fi nd and connect to your device. If the speaker still hasn't found your device
(which may happen if, for instance, another device has been connected after yours) make
sure the speaker isn't connected to another device currently. Then select the AWSBTSK
from the list of Bluetooth connections available in your device's Bluetooth menu to
connect to it or Fast Re-connect with press and release of the Pair button.
Using the Auxiliary Input
Connecting to an Audio Source
Connecting to an MP3 player, CD player, or computer
1. Open the storage compartment on the back panel to show the
attached 3.5mm cable.
2. Connect the cable to the headphone output on your MP3 player
or CD player (or the audio output jack on your computer) and
start playback.
3. Make sure the speaker is on. Then press the
of the speaker. The light on the front of the speaker will change
to solid green. You should hear sound coming from the speaker
now. To switch back to the speaker's Bluetooth connection,
press the
Note: You may fi t your connected device, such as iPhone or
iPod touch, inside the closed compartment while the speaker is
playing.
Warning:
or headphone outputs only.
speaker outputs as it will permanently damage the speaker.
Turning the Speaker Off
1. Press and hold the Power button
2. Confi rm that the speaker is off by verifying that the indicator light on the speaker's
front panel is no longer illuminated.
Note: When you turn off the speaker in Bluetooth mode, you will hear 4 beeps to indicate
Bluetooth mode is turned off.
Customizing Your Speaker With SkinIt
This portable wireless speaker comes with an offer card from SkinIt good for a free
speaker skin of your choice on Skinit.com See the offer card included in this package for
more information.
button again.
This product is designed to work with line level outputs
DO NOT
connect it directly to
on the top of the speaker to turn the speaker off.
Troublesho
The following troubleshooting guid
associated with the installation an
please call toll-free at 1-800-732-6
Issue:
No sound
Cannot pair
the speaker
with your
Bluetooth
device
button on the top
Specifi catio
Speaker
• Bluetooth® wireless technology: Blu
• 2-way acoustic design: 3" driver, 1.5"
• Audio output power: 5W (Maximum)
• Audio line-in
• Distortion : 0.5%
• S/N Ratio : 65dB (typical)
• Operation distance : Up to 10 meters
• Frequency response: 20Hz - 20kHz
• Operates using supplied AC adapter
*Maximum range; results may vary acc
Cause and solu
• Check that the AC
cord from the AC
or
• If you're using bat
correct polarity (+
• Confi rm that the s
• Check that the au
transmitting soun
• Make sure the vol
• Check that the sp
• Move the Bluetoot
technology genera
vary based on oth
etc.
• Make sure you hav
audio with Bluetoo
• Make sure you ent
• Make sure the Blu
• Move the Bluetoot
technology genera
vary based on oth
etc.
• Make sure your de
• Turn off all other n
• Bluetooth Reset: P
reset). This resets