Aerix DaVinci Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Drones Aerix DaVinci. Aerix DaVinci 16 páginas.

Compass Calibration

Please note: performing a calibration is highly recommended before every flight.

1. After the aircraft and the transmitter are paired. Place the aircraft on a flat surface

and continously press MODE until the transmitter displays "Rotate Horizontal"

(the green light at the back of the aircraft will flash rapidly). Rotate the aircraft

clockwise 2-3 times until the transmitter displays "Rotate Vertical" (the green light at

the back of the aircraft will start flashing slowly).

2. Hold the aircraft vertically, with NOSE DOWN and tail up. Rotate clockwise 3-5

times until the message "Rotate Vertical" is no longer shown on the transmitter display.

On successful calibration, the transmitter display will return to the main interface.

3. Now place the aircraft on a flat surface. Power off the aircraft battery and turn off the

transmitter. Calibration is now complete. You may re-pair the transmitter with the

aircraft and fly.

4. If the aircraft becomes unstable or unsteady during flight, it may need to be

re-calibrated by repeating the above procedure.

Horizontal ratation 2-3 times

Vertical rotation 3-5 times

If your aircraft begins to be unstable during flight or drifts quickly to one

direction, please calibrate the accelerometer.

1. Turn on the aircraft/transmitter.

2. Place the aircraft on a flat, level surface.

3. Push the throttle down and hold the position. Move the directional stick

quickly between right and left, until the back light on the aircraft flashes

(red-green-blue). Then release the sticks.