Altman AFS-700 Manual de instalação e do utilizador - Página 7

Procurar online ou descarregar pdf Manual de instalação e do utilizador para Destaque Altman AFS-700. Altman AFS-700 15 páginas. Led follow spot

INSTALLATION INSTRUCTIONS / INSTRUCTIONS D'INSTALLATION

POWER AND DATA CONNECTIONS

Power Connection Warnings

Before performing any field wiring, refer to and read the warnings contained in

WARNING! The AFS-700 LED Follow Spot should be connected to a constant circuit or a relay device. It should never be connected

to a dimmer or circuit controlled by a dimmer. Read

fixture.

WARNING! The maximum allowable input current is 20 Amps. Do not overload circuits! Luminaires must be supplied by a branch

circuit protected by a maximum 20 Amp circuit protector. Doit être alimenté par un circuit de dérivation protégé par un maximum de

20 ampères circuit protecteur. Ne surchargez pas les circuits!

WARNING! If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively

available from the manufacturer or his service agent.

Units are powered via an AC input cable from 100 to 240VAC, 50/60Hz and draw approximately 780 Watts of power. Table 2,

outlines the wire colors and their purpose.

Note: See Figure 5 for wiring connections.

IMPORTANT! The AFS-700 LED Follow Spot must be connected to and properly grounded to an viable earth ground.

Power and Data Connections

Table 1: Strobe Operation (via control panel)

Slider Position

0 to 50%

50 to 75%

Strobe Pulse Effect (Slower to Faster)

76 to 100%

"Connecting Power" on page 6

Table 2: AC Input Wiring

Wire Color

Brown or Black

Blue or White

Green/Yellow or Green

Figure 5: PowerCON (Blue AC Input) Connector Wiring

AFS-700 LED Follow Spot

Strobe Operation

Slower to Fast Strobe

Random Strobe Effect

"Important Information" on page

carefully on how to properly connect your

Purpose

Main / (L)ine

(N)eutral

Ground / Earth

Note: The supply cord and connecting

cord should be minimum 14AWG, extra-

hard-usage types such as Type G, S, SE,

SEO, SO, ST, STO, or W.