Alto DJM-2 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Misturador de música Alto DJM-2. Alto DJM-2 16 páginas. 2-channel dj mixer with beat counter

Imprimir página

3.1.5 The BPM Section

This is a key and exclusive function in your DJM 2 mixer. What is the Beat Per Minute function/ It simply indicate

the "speed" of the music through a 3-digit display. The beats (per minute) of the music are automatically measured

by the BPM and then displayed on the 3-digit display. Of course there is one BPM counter for every input channel.

Thanks to the BPM function you can mix more quickly songs with different tempo.

-. The TEMPO Display

This 3-digit display (one for every channel) will show the tempo of each channel. If the tempo changes the

display will change accordingly.

-. The BEAT ASSIST switch

The Beat Assist button is available on both channels and it is below the Tempo display. Press the Beat

Assist button and you can manually regulate the beat. The Led nearby the Beat Assist button will show

you when the function is active or not.

-. TEMPO DIFFERENCE Led segment

This 7 segment Led Meter will indicate the tempo difference in between the two channels or programs. If

the tempos on both channels is the same the center LED will light. If the tempo of the music on channel 1

is faster the LED's on the left will start to light and vice-versa.

-. TIME OFFSET Led segment

This 7 segments Led Meter is positioned immediately below the Tempo Difference display. This display

will indicate the synchronicity of the 2 channels. When the 2 channels are syncronized, the center LED

will light. If LED's on the left will start to light, Channel 1 is getting out of sync and vice-versa.

-. The CROSSFADER

Through this crossfader you can fade in between Channel 1 and 2. The Crossfader on your DJM 2 is

VCA (Voltage Control Amplifier) controlled and it is User replaceable.

CH 1

CH 2