Alto X23 Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Crossover Alto X23. Alto X23 13 páginas. 2-way stereo/3-way mono active crossover
Também para Alto X23: Manual do utilizador (12 páginas)

Imprimir página

4. INSTALLATION & CONNECTION

4.1 Mains Connection

Please ensure that the

cord into the wall outlet, use the same fuse as marked on the fuse holder at the AC power connection socket.

The mains connection of the

standard IEC receptacle. It meets all of the international safety certification requirements.

4.2 Audio Connection

The

LTO X23 Active Crossover

by several ways to support a variety of applications without any signal loss.

a. Wiring Configuration

Either the 1/4" TRS (Tip-Ring-Sleeve) jack or the XLR servo connector can be wired in balanced and

modes. Please wire your systems as the following examples:

For 1/4" Phone jack

TS Type Unbalanced

For XLR connector

XLR Type Unbalanced

b. In Line Connection

For these applications, the X23 Active Crossover provides XLR connectors to easily interface with most profe-

ssional audio devices. Follow the configuration examples below for your particular connection.

Balanced

TIP RING SLEEVE

LTO X23 Active Crossover is set to the correct supply voltage before plugging the power

LTO X23 Active Crossover is made by using the enclosed mains cord and a

presents with balanced XLR

Tip

Sleeve

Pin2 (+)

Pin3 (-)

(Linked to Pin1 manually,

Pin1 ( )

and 1/4" TRS

Tip

Ring

Sleeve

TRS Type Balanced

Pin3 (-)

)

Tip

Ring

SLEEVE RING TIP

Sleeve

Tip

Ring

Sleeve

connectors, and it can be interfaced

Tip

Ring

Sleeve

TRS Type Unbalanced

Pin2 (+)

Pin1 ( )

XLR Type alanced

unbalanced

Tip

Ring

Sleeve