Alto Professional APX2000 Manual de início rápido - Página 7
Procurar online ou descarregar pdf Manual de início rápido para Amplificador Alto Professional APX2000. Alto Professional APX2000 7 páginas.
Imprimir páginaSPECIFICATIONS
POWER SPECIFICATIONS
•
Continuous Power: 4 x 400 W at 4 ohms, 4 x 250 W at 8 ohms (0.5% THD);
2 x 2000 W at 8 0hms (Bridged mono mode)
ELECTRICAL SPECIFICATION
•
Input Sensitivity: 1.0 V
•
Input Impedance: 10 K Unbalanced
•
Frequency Response: (at 10 dB below rated output power) 20 Hz - 25 kHz
(+0/-3 dB)
•
Voltage Gain: 32 dB
•
Distortion: (SMPTE-1M) <0.5%
•
S/N Ratio: 110 dB
•
Inrush Current at initial switch on: 23.68A
•
Inrush Current after power supply interruption: 13.85A
GENERAL SPECIFICATIONS
•
Protection: On/Off, mute, DC-fault, load
•
Controls Front: Front Controls: AC power switch, 2 channel level control; –∞
to +30 dB
•
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
•
Signal Indicators: Signal present (green LED), clip (red LED), protection (red
LED)
•
Power Indicators: 1 blue LED integrated with power switch
•
Input Connectors: Balanced XLR-F / ¼" combo
•
Output: Touch proof binding posts and Speakon® NL4 connectors
•
Power Supply: AC Power: 100 VAC, or 110 – 120 VAC or 220 - 240 VAC (50
/ 60 Hz)
DIMENSIONS
•
(WxLxH): 19in x 14.8in x 3.5in (483mm x 376mm x 88.8mm)
•
Weight: 17.6 lb (7.9kg)
MANUAL VERSION 1.1
32