Akitio Taurus Super-S LCM Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Invólucro Akitio Taurus Super-S LCM. Akitio Taurus Super-S LCM 17 páginas. Dual-bay raid storage enclosure for two 3.5-inch serial ata hard drives

Imprimir página

Taurus Super-S LCM

3.4.3 Alarm Setup

The general alarm sound is the short beep you hear when starting up the system and it will sound

when something is wrong. To enable or disable the alarm, do one of the following.

• [ON] Beeper and alarm is enabled.

• [OFF] Beeper and alarm is disabled.

Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the

different options.

• To exit the menu without changing any of the settings, press the [Select] button until you see

the Exit screen and then press the [OK] button.

• To change the setting, press the [Select] button to choose your preferred mode and then press

the [OK] button to confirm the change.

3.4.4 TEMP Alarm Setup

This is the alarm sound you hear when the temperature that is measured by the thermal probe

reaches a critical level (>60˚C). You can enable or disable it here.

• [ON] High temperature alarm is enabled.

• [OFF] High temperature alarm is disabled.