Balteco VARIO Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Cabinas de duche Balteco VARIO. Balteco VARIO 17 páginas.

VARIO ENG

The icon shown on the timer row is either on or off (depending on

whether the timer is switched on or off). In blinking mode the on/

off icon can be changed by using buttons X/Y. Press OK button to

switch the timer on, if there is icon "ON" behind the time reading.

You can select on/off icon by pressing button P.

If the timer is switched on, the timer icon will be shown next to the

steam function icon on the main screen and the timer icon will also

be shown behind the time reading in standby mode.

NB! The user may, if so desired, use the steam before the time

previously set for switching on the steam, but the preset automatic

switch-on will be deactivated! If timer reading has been in the setup

(blinking) mode for 20 seconds without pressing OK button, the tim-

er setup will halt and display will stop showing "setup" submenu.

Display will stop showing "setup" submenu if you:

- have not pressed any of the buttons within 20 seconds,

- use buttons X/Y to select exit setup icon and press OK button.

- pressing button E, i.e. return to main menu.

NB!

a) Timer for steam function can be set maximum 24 hours in ad-

vance!

b) If the steam function is turned on by using timer setting and the

temperature of 33° C is not achieved within 15 minutes, the steam

function will be switched off!

Setting the indication of achieving the selected

temperature

In order to set the indication of achieving the selected temperature,

open "setup" submenu. Use buttons X/Y to select the setup icon

shown on the display and press OK button, and "setup" submenu

will open on the display. See the picture. Use buttons X/Y to se-

lect the icon of indication of achieving the selected temperature and

press OK button, the on or off icon shown on the same row will start

to blink (depending on whether the settings are switched on or off).

In blinking mode the on/off icon can be changed by using buttons

X/Y. Confirm the selection by pressing OK button.

If the on/off icon of achieving the selected temperature has been in

the setup (blinking) mode for 20 seconds without pressing OK but-

ton, the setup will halt and return to previously set mode.

Display will stop showing "setup" screen if you:

- have not pressed any of the buttons within 20 seconds,

- use buttons X/Y to select exit setup icon and press OK button.

- press button E, i.e. return to main menu.

NB! Default (factory) settings have the indication of achieving se-